Note that some Baintech, CTEK, GME & Vetus products are suffering shipping delays due to issues at the suppliers' warehouses.
Angled Tails suited to the most common sizes of tubing used in marine plumbing.
| Part number | Hose Tail Diameter | Angle | Hose Thread |
|---|---|---|---|
| SAW-45336 | 38mm | 90 Degree | 1-1/2" BSP |
| SAW-45341 | 25mm | 90 Degree | 1-1/2" BSP |
Trudesign
Angled Tails suited to the most common sizes of tubing used in marine plumbing. Tails come packaged with a Blue Seal to allow fitting to be rotated to a more suitable position if required...
Trudesign
Manufactured from high strength, UV stabilised glass reinforced nylon composite making the valve strong and lightweight. \ Long tail feature - The use of 2 hose clamps is recommended for secure...
Trudesign
TruDesign Hose Tail 120 Degree Glass reinforced nylon composite - High strength and light weight. Immune to corrosion and electrolysis for long service life. Chemical resistant - Impervious to...
Trudesign
Female 90 Degree Hose Tails with BSP female thread. UV and chemical resistance. Long tail and thick polyethylene walls. Operating temperature - 0 °C to 120 °C. Part...
Trudesign
Trudesign White 90 Degree Hose connectors to facilitate tidy routing of hoses round 90° corners, reducing crimped hoses and stress on hoses. Glass reinforced nylon composite - High strength,...