Portable marine battery charger that is designed to deliver a precise charge to marine batteries without over or under charging as can happen with standard automotive battery chargers.
It utilises a multi-stage charging system to charge up to 50% faster than a single stage (bulk) 10 amp portable charger, while properly protecting the batteries. O
ver charging can damage the useful life of the battery. Likewise, under charging over time will reduce the discharge time and shorten the battery life by as much as 20%.
- Fully Automatic 3-Stage Charging – bulk, absorption and maintenance cycles
- 10 Amps total output – on MK110PA
- LED Display – Indicates power on, charging, full charge and faulty connection
- Short Circuit and Reverse Polarity Protection – A safety feature which prevents the charger from operating if improperly connected to the battery
- For use with 12V/6 cell batteries – Suitable for 50 to 130 amp hour rated, flooded wet cell, maintenance free or starved electrolyte (AGM) batteries only
- 3 Year Warranty
| Part Number | Total Output | Model | Input | Length | Width | Height | Weight |
|---|---|---|---|---|---|---|---|
| MNK-114580 | 10 Amps | MK110PA | 230/240 Volts | 178mm | 229mm | 197mm | 2.9kg |
How to pick the right charger
- Determine how many charging banks your trolling system requires. You need one charging bank for each battery (include your starting battery, if appropriate).
- Determine the speed of recovery/recharging time you require:
- 4 - 6 hours recovery time = 10 Amps per bank
- 10 - 12 hours recovery time = 5 or 6 Amps per bank
- Select the Minn Kota charger that best meets your needs from the below.
