Note that some Baintech, CTEK, GME & Vetus products are suffering shipping delays due to issues at the suppliers' warehouses.
Connect your J1939 equipped GPSMAP series chartplotter directly to your Yamaha engine bus multi-hub to bring Yamaha’s custom touchscreen engine interface to your Garmin installation.
Pigtail Bus Wire Reference
| 6Y8-82521-01-00 | 1ft. Pigtail Bus Wire |
|---|---|
| 6Y8-82521-11-00 | 2ft. Pigtail Bus Wire |
| 6Y8-82521-21-00 | 3ft. Pigtail Bus Wire |
| 6Y8-82521-31-00 | 6ft. Pigtail Bus Wire |
| 6Y8-82521-41-00 | 9ft. Pigtail Bus Wire |
| 6Y8-82521-51-00 | 12ft. Pigtail Bus Wire |
| Part Number |
|---|
| GMN-010-12770-00 |
Garmin
Connect your GPSMAP 8400 or 8600 series chartplotter to a J1939 network to gain access to features, such as engine or generator monitoring. Like the NMEA 2000 network, the J1939 network follows...
Garmin
Garmin Marine Network Adapter Cable - Small (Female) to Large Adapt the small network connector to the larger Garmin Marine Network connector with this cable — which is part of the...
Garmin
Use this adapter cable with your existing external passive antenna with an SMA connector. Part Number GMN-010-12881-07
Garmin
Garmin 6-Pin Transducer to 4-Pin Sounder Adapter Cable This transducer adapter allows you to use your existing 6-pin dual-beam transducer with your 4-pin echo™ series fishfinder Part...