null Skip to main content

Rule-Mate fully automatic submersible bilge pumps with Rule's exclusive "Spongeability" feature. All-in-one bilge pump & switch so no float switch required.

The innovative design incorporates the bilge pump and water sensor in a single housing.

Unique Rule "Spongeability" feature leaves the bilge the driest ever - when water in the bilge reaches a certain height the solid state sensor automatically activates and the pump runs until the water is pumped out, reducing boat weight, saving fuel and minimizing bilge odour.

Pump check feature - simply touch the pump check button on the pump and hold for a few seconds to test cycle the pump. These pumps have a threaded discharge port with O ring seal and are supplied with both 20mm 90-degree and straight hose ports.

Available in 12 volt or 24 volt.

3 year limited warranty.

  • Fully automatic all-in-one submersible bilge pump systems
  • No separate float switch required
  • Bilge water sensor and pump in one common housing
  • Pump and sensor are internally common wired for easy installation
  • No battery drain other than when the pump is in use
  • Removable strainer and impeller area are accessible to clear debris
  • Threaded discharge ports for easy installation
  • 1 each straight and 90 degree hose ports supplied with the pump
  • A 3rd wire allows for manual over-ride using a Rule switch panel or it can activate an alarm or indicator lamp if desired
  • Thermal overload protection
  • Single touch pump check test button feature

All pumps are oval shaped - base footprint size : 110mm x 70mm.
Overall dimensions Inc straight hose port : 190mm L x 80mm W x 115mm H

Part NumberCapacityPower SupplyCurrentHose Outlets
RWB-824 800 GPH (50 LPM)  12V 3.0 Amps 20mm (3/4")
RWB-825 800 GPH (50 LPM) 24V 1.5 Amps 20mm (3/4")

Rule-Mate Bilge Pump - 800GPH, Automatic

Rule Bilge Pumps

Don't Pay $230.00
Our Price $204.70
(You save $25.30 )
(No reviews yet) Write a Review
UPC:
42237106223
Adding to cart… The item has been added