No.5 PLUS Antifouling - Premium Copper Based Ablative Antifouling

When you need an extra shield of protection! No.5 Plus is the high performance self-polishing antifoul for those tougher conditions.

No.5 PLUS is the solution to the ever increasing fouling burden in nutrient rich waters. Designed for the pleasure marine sector, to provide owners with a dependable, high performance coating system that will save them money in maintenance costs.

It is recommended for yachts, launches, tenders, dinghies and trailer yachts, No.5 PLUS will typically provide 22-26 months protection.* (based on two spray applied coats).

Not suitable for use on aluminium craft, outboard motors, sail drives or stern legs.

* Durability will be determined by film thickness applied, frequency of use, water conditions, tidal flow and many other variables.

Product Features

• Incorporates a powerful biocide package based on Altex proven binder system
• Ablative, multi-season technology provides a continuous supply of fresh biocides
• Complies with IMO requirements
• Excellent low activity performance
• Can be used for high speed crafts, however, ablation rate will increase at frequent and regular high speeds
• Performance of up to two seasons

Approvals:

• APVMA Registered – 86349/115543

Limitations of Use:

• NOT suitable for aluminium hulls and outdrives
• Some colour variation between batches and during storage may occur. If material from different batches is used, it is highly recommended to thoroughly “box” the various batches to achieve a consistent colour. Actual colour is developed over when the film begins to ablate during service.

Note: Because ablative antifoulings work by slowly wearing away to expose fresh biocides, the amount of product applied has a direct bearing on system life. One coat - per recommended spreading rate (see below) is designed to provide up to 12 months protection in average conditions, with average frequency of use.