Plumbing Fittings

Vetus By-Pass Valve for 8 mm Diameter Tubing By-pass valve for Ø 8 mm tubing (incl. tube connectors Ø 8 mm.) Part Number VTS-BYPASS8

Vetus By-Pass Valve for 18 mm Diameter Tubing By-pass valve for Ø 18 mm tubing (incl. tube connectors Ø 18 mm.) Part Number VTS-BYPASS18

Vetus By-Pass Valve for 10 mm Diameter Tubing By-pass valve for Ø 10 mm tubing (incl. tube connectors Ø 10 mm.) Part Number VTS-BYPASS10

Vetus Ball Valve, Stainless Steel Part Number Thread (G) Bore Normal press (bar) Working temp (C) Dimensions (H x W x L) Weight (kg) Hose diameter in mm VTS-BV12 1/2 Full Bore 69 -20 - +160 130mm x...

Ball Valve L Port - 316 Stainless Steel Part Number Thread SAW-45090 1/2" SAW-45091 3/4" SAW-45092 1" SAW-45093 1-1/4" SAW-45094 1-1/2"

Waste Camlock Connectors - Nyglass Material Suitable for waste outlets Part Number Weight Diameter Imperial Size Material W x H SAW-29644 0.06kg 28.5mm 1-1/4" Nyglass 48 x 81 mm

Flush Link RV Water 130 Degree with Valve Ideal for campers, RVs, offroad vehicles, storage tanks, DIY applications etc. Lead-free and corrosion resistant 316L stainless steel. Double Viton O-ring seals. Ball valve for flow control. A removable...

This Adaptor allows you to use a Whale Aquasource, Whale AquaSmart and Whale Watermaster plug with Truma Crystal Mk2 or Truma Compact Mk2 housing socket. The adaptor will also enable the use of a Whale Aquasource mains water adaptor kit with a Truma...

Whale® Aquasource Watermaster Mains Kit Allows connection from mains water supply to Whale Watermaster Exterior sockets. The easy fit plug regulates water pressure to 1.5bar for a reliable continuous supply of water. Lay flat hose allows for easy...

Quick Connect 15 Tubing manufactured by Whale. Sold per metre. Semi rigid tubing with a 15mm OD and 11mm ID Available in red (for hot water), blue (for cold water) and green (for cold water & general unpressurised use) Manufactured to food...

Galleymate Quick Connect Brass Fitting Get connected with the Quick Connect Brass Fitting. This brass fitting is easy to snap on and off without fuss. It’s spring-loaded. 3/8SAE brass fittings Part Number CMB-QCBF

Jabsco Solenoid Valve Assembly to suit Jabsco's Deluxe Silent Flush Electric Toilet (37038-1012). Solenoid valve and siphon breaker assembly to ensure there is no backflow into the fresh water system. Part NumberPowerJabsco Part...

TruDesign Hose Tail 120 Degree Glass reinforced nylon composite - High strength and light weight. Immune to corrosion and electrolysis for long service life. Chemical resistant - Impervious to diesel, petrol and antifouling paints. UV resistant,...

Tap Push Button and Timer White Housing Brass body and chrome plated push button. 20 second timer will automatically shut water off. Adjustable flow rate, set to 40 PSI as default. 1/2" BSP fittings. 1/2" nut and olive included. Comes with...

Tap Push Button and Timer - Chrome Plated Brass body and chrome plated push button. • 20 second timer will automatically shut water off. • Adjustable flow rate, set to 40 PSI as default. • 1/2" BSP fittings. • 1/2"...

Tap Push Button and Timer - Weld In Alloy Brass body and chrome plated push button. • 20 second timer will automatically shut water off. • Adjustable flow rate, set to 40 PSI as default. • 1/2" BSP fittings. • 1/2"...

Tap Push Button and Timer - Black Housing Brass body and chrome plated push button. 20 second timer will automatically shut water off. Adjustable flow rate, set to 40 PSI as default. 1/2" BSP fittings. 1/2" nut and olive included. Comes...

TruDesign Aquavalve Thru Bulkhead Extension. CAUTION: Not to be used for diverting fuels. Part Number Colour SAW-45347 White

Viper Pro Series Skin Fitting Part NumberDiameter VIP-70021 19mm (3/4") VIP-70020 38mm (1.5")

Trudesign Non Return Valve - Threaded. Ideal for stopping water backflow from siphoning. Stainless spring - No corrosion or risk of internal valve staying open. Very low opening pressure with minimal restriction on flow-rate. Minimal...

Replacement 'T' handles for manual ball valves. Glass reinforced nylon composite - High strength, stiffness and light weight. Immune to corrosion and electrolysis for long service life. Chemical resistant - Impervious to diesel, petrol and...

Bulkhead Straight Hose Joiner - 25mm / 28mm. Part Number Hose Tail Diameter Cut Out SAW-45489 25mm / 28mm 32mm

316G stainless steel Type: Male / Female Angle: 90° Part NumberHose Thread SAW-45650 3/8" SAW-45651 1/2" SAW-45652 3/4" SAW-45653 1" SAW-45654 1-1/4" SAW-45655 1-1/2" SAW-45656 2"

Spanner for tighten TruDesign® Aquavalve to a maximum of 16mm (12ft/lbs). Glass reinforced nylon composite - High strength, stiffness and light weight. Immune to corrosion and electrolysis for long service life. Chemical resistant - Impervious...

The Threaded Tubes provide a simple and tidy solution for passing plumbing through the bulkhead of your boat. Manufactured from glass-reinforced nylon composite - High strength and light weight. Immune to corrosion and electrolysis - Long life with no...

Trudesign Tank Fittings - Straight. Specifically designed to suit Tank Fitting Tubes (450228, 450229). Glass reinforced nylon composite - High strength, stiffness and light weight. Immune to corrosion and electrolysis for long service life...

Trudesign Tank Fittings - 90 Degree. Specifically designed to suit Tank Fitting Tubes (450228, 450229). Glass reinforced nylon composite - High strength, stiffness and light weight. Immune to corrosion and electrolysis for long service life...

Trudesign Tank Fittings - 120 Degree. Specifically designed to suit Tank Fitting Tubes (450228, 450229). Glass reinforced nylon composite - High strength, stiffness and light weight. Immune to corrosion and electrolysis for long service life...

Used as an overflow check valve or tank pickup. Angled end can be cut to suit to suit different sized holding tanks. Flanged end is retained in tank fitting without use of adhesive Caution: DO NOT cut flange end. Part...

Trudesign Skin Fitting Recessed - Black. Designed to be installed below water line. Paintable - Can be painted with all types of antifouling. Glass reinforced nylon composite - High strength, stiffness and light weight. Immune to corrosion and...

Trudesign Skin Fitting Recessed - White. Designed to be installed below water line. Paintable - Can be painted with all types of antifouling. Glass reinforced nylon composite - High strength, stiffness and light weight. Immune to corrosion and...

Trudesign Skin Fitting Installation Tool Glass reinforced nylon composite - High strength, stiffness and light weight. Designed for single person installation. Part Number Suits Size SAW-450035 19mm...

White nylon thru-hull connection skin fitting are moulded nylon glass reinforced polymer which dramatically increases strength, stiffness and light weight. Designed to be installed below water line. Paintable - Can be painted with all types of...

Hose Tail made with bronze. Cast bronze tails to suit most hose sizes. BSP threaded, suitable for survey. Part Number Thread BSP Hose Size Overall Length BLA-138004 1/2" 13mm (1/2...

Elbow Tails made with brass. 90º brass elbow with a BSP thread one end and a barbed hose tail connection on the other end. Part Number Hose ID Thread BSP BLA-138102 6mm...

Elbow Tails made with Bronze. 90º cast bronze elbow with a BSP thread one end and a barbed hose tail on the other end. Part Number Hose Size Thread BSP BLA-138060 19mm (3/4...

Legislation in many countries dictates the use of holding tanks near shore, or in defined areas. By installing a diverting valve (Y Valve), the user has the choice to divert black water to a holding tank or directly overboard when circumstances allow...

Skin Fittings made with bronze. Cast bronze through hull fittings. BSP thread. Suitable for survey. Part NumberThread BSPThread LengthFlange Outer...

Marine Town Scoop Skin Fittings made with stainless steel. Combines a thru-hull skin fitting cast into a water scoop strainer. 316 grade solid cast construction. Earth/anode wire connection tab is included on ½" to 1½" sizes. Suitable...

Skin Fittings made with stainless steel. Cast 316 grade stainless steel construction. Highly polished mount flange. Internal lugs to hold fitting during installation. Fully threaded for direct connection to ball valve. Suitable for survey...

System Converters for quick connect 15 manufactured by Whale. Converts from Quick Connect 12 to 15 Part NumberPack QuantityAvailability WHL-136636 1 Special Order* *Allow 6-8 weeks for delivery  

Scoop Skin Fitting made with bronze. Combines a through hull skin fitting cast into a water scoop and strainer. BSP thread. Part Number Thread BSP Length Width Scoop Depth Mount...

Marine Town Skin Fittings with straight tail. Nylon and stainless steel combined. Glass reinforced nylon with a 316 grade stainless steel stamped face. Combining the strength and lightweight of a reinforced nylon with the aesthetics of polished...

Marine Town Skin Fittings with mega flow stainless steel. Lightweight high strength construction ensures maximum water flow made from high density marine grade 316 stainless steel includes watertight gasket. Part Number Hose...

Marine Town Skin Fittings with 90 degree tail. Nylon and stainless steel combined. Glass reinforced nylon with a 316 grade stainless steel stamped face. Combining the strength and lightweight of a reinforced nylon with the aesthetics of...

Scoop Filters made with bronze. Mounts over existing through hull fitting to strain and scoop water. Part NumberOverall LengthWidthScoop DepthInternal DimensionsMount Screws BLA-138853 125mm 84mm 20mm   3mm...

Skin Fittings made with acetal. White acetal through hull fittings. Suitable for most above waterline outlets. Part Number Hose Size Mount Hole Overall Length BLA-138240 13mm (1/2...

Marine Town Skin Fittings made with plastic. White moulded plastic through hull fittings. Suitable for most above waterline outlets. Part Number Hose Size Mount Hole Overall Length MTN-138230 15mm (5/8...

Plastic Skin Fittings manufactured by Perko. White moulded plastic through hull fittings. Broad flange provides large sealant area. Suitable for most above waterline outlets. Part Number Hose Size Flange Overall...

'L' Head Skin Fittings made with white acetal. Manufactured from U.V. stabilised, white acetal. Features 'L' shaped head for lowest possible drainage point. Ideal for cockpit and livewell drains. Part NumberHose SizeMount HoleOverall...

'T' Hose Joiners made with polypropylene Three way 'T' shaped hose connection, with barbed hose tails. Made from polypropylene. Part Number Hose Size BLA-138404 13mm (1/2...

'T' Hose Tails made with polypropylene. BSP external thread with barbed hose tails. Made from polypropylene. Part NumberThread BSPHose Size BLA-138384 1/2" 13mm (1/2") BLA-138385 3/4" 19mm (3/4") BLA-138386 1" 25mm...

Manifolds made from nylon. Designed for installation in-line in 38mm (1½") flexible pipe This fitting enables multiple drainage from up to three services to one through hull skin fitting, saving on installation costs and labour. Made...

End Caps made with polypropylene. Internal BSP thread end cap. Made from polypropylene. Part NumberThread BSPAvailability BLA-138554 1/2" Special Order* BLA-138555 3/4" Normally in Stock BLA-138556 1" Special...

End Plugs made with polypropylene. External BSP thread end plug. Made from polypropylene. Part NumberThread BSP BLA-138534 1/2" BLA-138535 3/4" BLA-138536 1" BLA-138538 1-½"

Quick Connect 15 Tubing manufactured by Whale. Semi rigid tubing with a 15mm OD and 11mm ID Available in red (for hot water), blue (for cold water) and green (for cold water & general unpressurised use) Manufactured to food grade 75mm...

Thread Adaptor for quick connect 15 manufactured by Whale. Used to adapt 3/8" BSP threads to Quick Connect 15 tubing. Part NumberMaterialThread BSP WHL-136634 Plastic 3/8" WHL-136635 Brass 3/8"

Straight Barbed Adaptors for quick connect 15 manufactured by Whale. Adapts Quick Connect 15 to hose. 136655 sold as a pair. Part NumberSuits Hose Internal...

Elbow Barbed Adaptors for quick connect 15 manufactured by Whale. Adapts Quick Connect 15 to hose. 136660 sold as a pair. Part NumberSuits Hose Internal Diameter WHL-136660 13mm WHL-136661 19mm