Networking and Adaptor Cables

Garmin NMEA 2000 T-connector, 1 Port Add components to your NMEA 2000 network by installing our T-connector on your backbone cable. The revised version of this T-connector is offset by 45 degrees compared to the previous version. Part...

Garmin NMEA 2000 Multi-port T-connector, 4 Ports Make NMEA 2000 installations easier with our multi-port T-connector. This solution creates a more robust NMEA 2000 backbone by reducing issues with breaking points as well as stress induced by long back...

Garmin NMEA 2000 Starter Kit, Full Artwork Garmin's starter kit has everything you need to build a basic NMEA 2000 network on your boat. The kit includes an NMEA 2000 drop cable (2 m), backbone cable (6 m), power cable (2 m), 2...

Garmin NMEA 2000 Terminators, Male This standard male or female NMEA 2000 light cable connector provides termination resistance for one end of the backbone of the network. Each male or female connector sold separately Part...

Garmin NMEA 2000 Terminators, Female This standard male or female NMEA 2000 light cable connector provides termination resistance for one end of the backbone of the network. Please Note: Each male or female connector sold separately. Part...

Garmin NMEA 2000 Field-installable Connector, Male Use our male or female NMEA 2000 field-installable connectors to create custom-length drop cables and backbone extension cables. These connectors (sold separately) also can be used to shorten any NMEA...

Garmin NMEA 2000 Field-installable Connector, Female Use garmin's male or female NMEA 2000 field-installable connectors to create custom-length drop cables and backbone extension cables. These connectors (sold separately) also can be used to shorten...

Humminbird Power Cable to suit Sonar Module & 360 Power Cable Pc 2 Humminbird Power Cable T/S Ion/Sm/360 105920 6 feet power cable. Compatible Units AS 360SSI Part Number HUM-105920

Humminbird Autopilot Compass to suit SC 110 This reliable electronic compass maintains your course based on magnetic heading reference. Automatic Self-Compensation, Ensures Relevant Magnetic Reference, Durable Construction. Compatible Units • SC...

Humminbird Power Cable Mega 360 The MEGA 360 PC is a 10' marine-grade power cable for a MEGA 360 Imaging transducer. The one end provides a quick-disconnect plug for easy connection to an existing MEGA 360 transducer, while the other end features...

Humminbird APEX HDMI Cable in 3m The AD HDMI 16 is a marine-rated HDMI cable for connecting APEX chartplotters to video and camera inputs or connecting APEX to an HDMI accessory display Compatible with: All APEX models Connect compatible...

Humminbird Cable NMEA 2000 to suit HELIX G4 Part Number HUM-103073

Humminbird Cable Adaptor for External GPS to suit APEX The AS GPS is an adapter cable that allows APEX chartplotters to connect with a Humminbird external GPS receiver. Combined with an external GPS receiver, users will get extremely accurate position...

Humminbird Cable HDMI to suit APEX 3M Part Number HUM-103071

Garmin Water Speed Sensor - 6-Pin Easily collect speed data and send it to your device with our water sensor. Simply mount our speed sensor on the transom of your vessel and connect it to your device. The paddle wheel on the speed sensor turns as the...

Garmin Speed Sensor, 7-pin Easily collect speed data and send it to your device with our speed sensor. Simply mount our speed sensor on the transom of your vessel and connect it to your device. The paddle wheel on the speed sensor turns as the vessel...

Garmin Water Speed Sensor 4-pin Easily collect speed data and send it to your echo™ fishfinder with our water sensor. Simply mount our speed sensor on the transom of your vessel and connect it to your device. The paddle wheel on the speed...

Lowrance RI-10 Broadbar Radar Interface 3G/4G RI10 Radar Interface box. Part Number LOW-AA010189

B&G WS310/700 Wired Interface Interface converts NMEA 0183 to NMEA 2000®. Compatible with WS310 and WS700 series sensors only. Part NumberPower ConsumptionSupply VoltageWarrantyWeightDimensions BAG-000-15090-001 < 0.6W 12V DC 2...

B&G MHU Wind Speed Cups - All Models Speed cups for B&G Wind Sensors, including mounting nut. Compatible with WS310, WS320, WS700, VMHU, 608, 508, 213 and 496 sensors. Part Number BAG-000-15140-001

B&G WS310 Wired Interface WS310 (wired) Interface for use with WS310 Wind Sensor, allows connection to your NMEA 2000® network. Part NumberSupply VoltageCompass SafeWarrantyW x H x D BAG-000-14389-001 12V DC 300mm 2 years 90mm x 20mm...

B&G WS320 Wireless Receiver Interface Only WS320 Wireless Interface for use with WS320 Wind Sensor, allows connection to your NMEA 2000® network Features: Bluetooth 4.0 communication Range suitable for mast heights of up to...

CZONE Network Interface CZONE™ Network Bridge Interface is designed to isolate sections of the NMEA 2000 network to decrease standby current draw. Can be used for Isolation when bridging between two CAN networks, (eg connecting CZone to Simrad...

B&G NEP-2 Network Expansion Port B&G displays use high-speed Ethernet connectivity to share charts, waypoints, and routes. Accessories such as sonar modules and radar systems also connect to this network, giving you access to those accessories...

Lowrance NEP-2 Network Expansion Port The Network Expansion Port allows multiple displays to exchange chart, waypoint, route, radar and sonar data across an Ethernet network. Features: High Speed Plug & Play 5 Ports Ethernet...

NMEA 2000 Starter Kit for Lowrance, B&G and SIMRAD The NMEA 2000 Starter Kit comes with everything need to build a NMEA 2000 network, including a network power cable, 15-foot NMEA 2000 cable, T-connectors (2) and network terminators (2)...

Lowrance N2K-PWR-RD Network Power Nod The N2K PWR-RD is a NMEA 2000 Power Cable that comes with a NMEA 2000 network T connector. Part Number LOW-000-0119-75

Lowrance Precision-9 Compass Solid-state compass with heading, rate of turn, pitch and roll output over NMEA 2000. The Precision-9 Compass supplies accurate heading and rate-of-turn information to Lowrance autopilot, radar and navigation systems over an...

Lowrance Speed Sensor Pack The Speed Sensor is a transom-mounted paddlewheel that uses the flow of water beneath the boat to measure your speed. Pair the Speed Sensor with a Fuel Flow Sensor to monitor your vessel’s fuel economy...

Lowrance Fluid Level Sensor Part Number LOW-000-11518-001

Lowrance Temperature Sensor Add the Lowrance Temperature Sensor to your NMEA 2000 network to monitor the temperature inside, outside, in your live well, bait well and more all from the convenience of your multifunction display. Features: Cable...

Lowrance Pressure Sensor The Pressure Sensor is pre-configured for engine water pressure, but also may be configured for engine boost pressure, engine oil pressure, transmission oil pressure and pitot speed using compatible Lowrance displays...

Lowrance AT10HD Heading Data NMEA0183 Converter The Simnet heading sensor input converts AT10HD, NMEA 0183 fast heading data to Simnet format. Part Number LOW-24006694

Lowrance Hook2 / Reveal SplitShot Inline Temperature Sensor The HOOK²/Reveal SplitShot inline temperature sensor provides a secondary source for water temperature, allowing anglers to use a shoot-thru hull transducer installation without losing...

Lowrance Hook2 4x Inline Temperature Sensor The HOOK² 4x inline temperature sensor provides a secondary source for water temperature, allowing anglers to use a shoot-thru hull transducer installation without losing the capability to monitor water...

Raymarine STNG In-Line Terminator Part Number RAY-A06074

Raymarine Extender Dongle Part Number RAY-A06030

Raymarine STNG Backbone Terminator Part Number RAY-A06031

Raymarine 5 Way Connector Part Number RAY-A06064

Convert your compatible device’s network connector from small (male) to large so it can connect to a compatible Garmin chartplotter. Part Number GMN-010-12531-01

Humminbird 5-Port Ethernet Switch Easily create a network using Ethernet-capable Humminbird fishfinders Wirks with 12V and 24v electrical systems Allows four Ethernet items to connect (or with additional Ethernet switches up to sixteen items - sold...

Garmin Marine Network to Fusion Cable - Small (F) Use Garmin' adapter cables to link your GPSMAP® Series chartplotter to a compatible Fusion® stereo. These cables will connect a Garmin Marine Network port to an RJ45 port and are...

Garmin Marine Network to Fusion Cable - Large (M) Use Garmin's adapter cables to link your GPSMAP® Series chartplotter to a compatible Fusion® stereo. These cables will connect a Garmin Marine Network port to an RJ45 port and are...

 Raymarine DeviceNet (Female) to STNG Spur (Female) Adaptor Cable (1m) Part Number RAY-A06075

Garmin Solenoid Power Cable This power cable integrates protection diodes and self-healing fuses to protect your ECU from hazardous voltages generated by hydraulic solenoid coils when used in a solenoid configuration. For use with the GHP...

Garmin Actuator Power Cable Part Number GMN-010-11533-00

Garmin Rudder Feedback Cable Part Number GMN-010-11532-00

Garmin GRF 10 Extension Cable Add 5 m (16.4 ft) or 15 m (49.2 ft) to your cable and let your GRF™ 10 rudder feedback sensor reach your GHP™ 12 or 20 Part Number Length GMN-010-11829-01 5m (16...

Garmin 12-Pin to Dual 4-Pin Transducer Y-Cable Use this adapter cable when connecting a compatible 12-pin transducer to a compatible 4-pin Garmin device Part Number GMN-010-12234-05

Garmin 8-Pin Transducer to 4-Pin Sounder Adapter Cable Connect an 8-pin transducer to a 4-pin sonar port on a compatible marine device with this adapter cable Part Number GMN-010-12719-00

Garmin 6-Pin Transducer to 4-Pin Sounder Adapter Cable This transducer adapter allows you to use your existing 6-pin dual-beam transducer with your 4-pin echo™ series fishfinder Part Number GMN-010-11615-00

Garmin Quarter-turn Collar CCU Extension Cable - 15m Mount your CCU farther than 3m (9.8 feet) away from the ECU with a 15m (49.2 ft) extension cable. Part Number Length GMN-010-11156-01 15m (49.2ft)

Garmin Interconnect Cable (Hydraulic) Use this 5-meter cable to connect your GHP™ Reactor autopilot CCU (couse computer unit) to ECU (electronic control unit). Includes bare wire connections for the buzzer and optional Shadow Drive valve. ECU...

Garmin Quarter-turn Collar CCU Extension Cable - 5m Mount your CCU farther than 3m (9.8 feet) away from the ECU with a 5m (16.4 ft) extension cable. Part Number Length GMN-010-11156-00 5m (16.4ft)

Garmin ECU Power Cable Provide power to your electronic control unit (ECU) with Garmin's ECU power cable. Simply wire the ECU power cable to your boat battery as one of the last connections made during GHP™ 10 installation. Part...

Garmin 7-Pin Data Cable with 90-degree Connector Connect your GMI™ 20 or GHC™ 20 to a NMEA 0183 device with this 7-pin power/data cable. Features 90-degree connector for installation in tight spaces or flush mounting Part...

Garmin USB Mini-B Cable (GND 10) Connect your GND 10 black box bridge to your computer with this USB mini-B cable — so it can send sailing-specific functions via the Nexus FDX protocol to the Nexus and NMEA 2000® networks...

Garmin Nexus Network Cable - 5m Use our 5 m straight cable to connect your GND™ 10 to the Nexus network so you can get sailing-specific functions Part Number GMN-010-12117-03

Garmin Nexus Cable - 8 m, Bare Ends Extend your Nexus Network in your boat with this 8 m cable with bare ends. Part Number GMN-010-12117-09

Garmin Wired Standard Length Range Finder Trigger Mount this range button in your preferred location for silent one-finger activation of the Xero® X1i’s laser range finder. Cable is approximately 17 inches (430 mm) long...