Marine Trimming & Accessories

Ronstan RC00150 Batten Receptacle with Link Fork style link provides movement in all directions and up to 105 degrees either side of centre, for Series 14 and 22, and up to 112 degrees either side of centre for Series 6 and 8...

Ronstan RC00140 Batten Receptacle with Link Fork style link provides movement in all directions and up to 105 degrees either side of centre, for Series 14, 19, and 22, and up to 112 degrees either side of centre for Series 6 and 8. Features Material:...

Ronstan Batten Receptacles - Nylon Spares to suit fork style links. Made from impact resistant, U.V. stabilised nylon Part Number Size Suits Battens Weight RON-RC00140 Small Batten 40mm (1 1/2") flat / 14mm...

Ronstan Batten Receptacle Link - M10 Thread Provides movement in all directions and up to 105 degrees either side of centre, for the Series 14, 22, and 19 batten systems, and 112 degrees either side of centre for the Series 6 and 8 Ballslide™...

Ronstan Stay Bush - Glue-In Made from impact resistant and UV stabilised nylon. Note: Product images are indicative and products may differ slightly depending on size. Part Number Internal Diameter (A) (B) (C) (D) Weight RON-PNP39A 10mm...

Ronstan Shock Cord Hook - Suits 5mm Cord Line hanger clip, suits 5mm (3/16") diameter shock cord retaining loop. Made from impact resistant, UV stabilised nylon. Features Knots are concealed in body. Requires 2 x 4mm (5/32")...

Ronstan Batten Pocket End - 8 x 50mm Heavy-duty batten pocket end which suits battens up to 50mm (2") x 8mm (5/16"). Slot at the luff end allows attachment by webbing to slides, slugs or cars. Suitable for keelboats, dinghies and...

Ronstan Batten Pocket End - 5 x 50mm Batten pocket end which suits battens up to 50mm (2") x 5mm (3/16"). Slot at the luff end allows attachment by webbing to slides, slugs or cars. Suitable for keelboats, dinghies and trailerable yachts...

Ronstan Batten Pocket Protector - 7 x 30mm Batten pocket protector which suits battens up to 30mm (1 1/8") x 7mm (9/32"). Titanium. Suitable for keelboats, dinghies and trailerable yachts. Screws included. Part Number Suits...

Ronstan Batten Pocket End - 5 x 40mm Batten pocket end which suits battens up to 40mm (1 1/2") x 5mm (3/16"). Suitable for keelboats, dinghies and trailerable yachts. Moulded in impact resistant, UV stabilised Nylon. Screws included...

This cloth based double sided tape is ideal for sailmaking. Sold by the roll. Cloth Carrier Width: 12mm Roll Length: 50m Part Number Width BBI-J25005-0012 12mm

This jaw slide is installed onto a bimini tube so another tube can be attached. A pair of set screws lock it in place. The mount is offset to allow the attached tube to be used as a handrail. 316 Stainless Steel Bimini Jaw Slide With...

This cap is installed to the tube of a bimini so it can be attached to deck mounts or jaw slides.   316 Stainless Steel Bimini Tube Cap With Eye 5/16" (7.9mm) Eye Suits 1" (25mm) Tube Part Number To...

Locking FlexiTrack for use with 7.5mm keder tape. Radiused base for mounting on both curved and flat surfaces. The screw cover strip can also be used to lock in another piece of fabric, with a clean finish. Available in white only. FlexiTrack...

Hook & Loop Washer Hook Type White 45mm Diameter Part Number Diameter BBI-HHW 45mm

Quick release pin for bimini mounts. Ball detent style. 316 Stainless Steel Lanyard Included (15cm) 1/4" (6.5mm) Part Number Diameter BBI-G634LT 1/4" (6.5mm)

Eye strap made from Stainless Steel. Can be used for lacing and fastening smaller objects. Part Number Size BBI-G204S T.B.C.

Quick release toggle pin for bimini mounts. 316 Stainless Steel Includes Split Ring 1/4" (6.5mm) Part Number Diameter BBI-G637PIN 1/4" (6.5mm)

Quick Fits are a system for holding fabric in position during cover construction. The Pin (BBI-C896) snaps onto a standard press stud. The fabric can then be pushed onto the pin and secured using the Cap (BBI-C896CAP). Multiple Quick Fits can be used...

Quick Fits are a system for holding fabric in position during cover construction. The Pin (BBI-C896) snaps onto a standard press stud. The fabric can then be pushed onto the pin and secured using the Cap (BBI-C896CAP). Multiple Quick Fits can be used...