Life Jacket Accessories & Spares

Crewsaver Crewfit Rearming Kit 33g Automatic (for 150/165N) 33g CO2 re-arming pack for use with Crewsaver 150N lifejackets (except Crewfit Junior) for serial numbers starting with the letter L. Part Number CRW-CSRA09

Baltic Re-Arm 38G Co2 Cylinder Kit Part Number BAL-2438-000-1

Reliable and easy-to-use system for rescuing a person in water. Easy mounting on the pushpit with the help of sturdy straps that allow you to secure in place both vertically and horizontally. The Rescue Sling is made of a durable fluorescent outer...

Baltic SLX SOLAS Lifejacket Light. Automatic. Made in Denmark. Part Number BAL-20010

Safety clips for United Moulders and Halkey Roberts valves. Part Number BAL-2404-000-1

Baltic PFD Crotch Strap. Attaches to Baltic life jackets to prevent the jacket riding up. Great for kids' PFDs. Part Number Strap Wdth BAL-2510-000-1 30mm

Baltic Auto UML PFD Cartridge  with Safety Indicators Suits Baltic PFDs. Part Number BAL-2520-000-1

Whistle for lifejackets, approved according to EN ISO 12402-8. Suits Baltic PFDs. Part Number BAL-2508-000-1

This ULTRA 2 litre bladder will fit most hydration systems. Part Number Capacity ULT-PUBLADDER 2 Litres

Spinlock Lume-On Lifejacket Bladder Illumination Lights are used in addition to approved lifejacket lights. They consist of 2 flashing LED Lights (pair) illuminate the inflated lifejacket bladder to increase visibility and aid location...

Pro Sensor ELITE re-arming kit (60g) for Spinlock Deckvest 5D 275N (2018 onwards) & Deckvest 6D 275N models. The Deckvest 5D (purchased after October 2018) & Deckvest 6D 275N use the UML Pro-Sensor ELITE inflator. The inflator & firing head...

For re-arming the Spinlock ALTO 75N belt pack (2 x 16g cylinder). The ALTO flotation aid uses a 16g CO2 bottle in the Halkey Roberts Mini Inflator Firing Head. This is a manual only system. The re-arming kit comes with 2 spare cylinders and green...

Spinlock Pro Sensor re-arming kit (60g) for Deckvest 5D 275 (purchased before October 2018), DURO 275N & DURO SOLAS. Note: For Deckvest SOLAS, 2 x 60g cylinders may be required. This is a water sensitive activation system that...

Spinlock re-arming kit (20g) for Deckvest CENTO Junior lifejacket harness. The Deckvest CENTO uses the UML MK5 Inflator. This is a water sensitive activation system that uses a compressed paper capsule which dissolves when wet which then releases a...

Pro Sensor re-arming kit (33g) for Deckvest 5D 170N (pre-2018) and Deckvest LITE & LITE+ and DURO 170N. The following Spinlock jackets use the UML MK5 inflator: Deckvest LITE and LITE+ Deckvest 5D (purchased before October 2018) This is a...

Deckvest VITO Hammar 275N Deckvest Re-arming Kit. The Deckvest VITO uses the Hammar inflation system. This system is activated by water pressure and will not inflate until the cap is approximately 10cm under water. The system is designed for use in...

Deckvest VITO Hammar 170N Deckvest Re-arming Kit. The Deckvest VITO uses the Hammar inflation system. This system is activated by water pressure and will not inflate until the cap is approximately 10cm under water. The system is designed for use in...

Rearming Kit for Spinlock Deckvest 5D Hammar 275N (a discontinued product). The Deckvest 5D Hammar uses the Hammer inflation system. This is activated by water pressure and will not inflate until the cap is approximately 10cm under water. The...

Rearming Kit for Spinlock Deckvest 5D Hammar 150N/170N (a discontinued product). Part Number SPN-SPDW-RAH/150

Compact lifejacket light for complete all-round visibility. Pylon lifejacket light designed for ease of attachment and low profile packing 23cm antenna light which deploys on inflation of lifejacket Eliminates head shadow and sprayhood...

Protects your inflatable PFD against abrasion, oil and other industrial stains and the high visibility ensures you are seen in higher risk environments. The Protective Cover is designed to fit all Burke Inflatable PFDs. Manufactured to EN 396. Part...

Burke Indicator Clip for UML 5 Mini Manual Firing Mechanism (Pack 5). For instructions on how to self-service your inflatable lifejacket click here. Part Number BRK-IRUMS1622

Spare retaining clips for all Burke inflatable lifejacket models are available for those carrying out self-inspection. For instructions on how to self-service your inflatable lifejacket click here. Part Number BRK-IRUMA1622

Spinlock Pro Sensor ELITE re-arming kit (33g) for Deckvest 5D 170N (purchased after October 2018) & Deckvest 6D 170N models These Deckvests use the UML Pro-Sensor ELITE inflator. The inflator & firing head are shorter and...

Launched in 2017 the Pro Sensor Elite Automatic Inflator replaces the Pro Sensor Automatic Inflator. 13mm shorter and 4 grams lighter than the original Pro Sensor Automatic Inflator The automatic capsule contains a powerful spring...

RELAXN Inflatable Replacement Canister - 33g. 150N 33g CO2. Suitable for recharging Relaxn, Burke and many other 150N inflatable PFD's. Kit contains 33 gram CO2 cylinder with safety indicators to fit UML and Halkey inflation mechanism...

Replacement 33g CO2 cylinders to suit BLA inflatable jackets available in different sizes. Suits manually activated PFDs.. NOTE - This item can be transported by road freight only. Part Number Type Size Buoyancy Level ...

This adjustable crotch strap fits all Burke PFDs and deck safety harnesses with external waist strap or crotch strap attachment loop.  Part Number BRK-IRUM03010B

The UML Sealing Cap disengages the automatic inflation of UML cartridge - meaning you can use your Automatic Burke PFD as a manual model. Part Number BRK-IRUM03010B

Replacement UML water sensing cartridge for all Burke automatic PFDs. An annual inspection of your Inflatable PFD should begin 12 months from date of purchase. Instructions for self-inspection can be found here - Instructions for Annual Self...

Our PFD Recharge Kit comes with a 33g Co2 cylinder plus 3 retaining clips to suit all Burke inflatable PFDs. An annual inspection of your Inflatable PFD should begin 12 months from date of purchase. Instructions for self-inspection can be...

The UML Blanking Cap fits all Burke Current Model UML automatic inflator heads when the cartridge is removed. Part Number BRK-IRUM03010B

Solas Approved Reflective Tape Part numberLengthWidth SAW-50120 10m 50.0mm SAW-50118 50m 50.8mm