Note that some Baintech, CTEK, GME & Vetus products are suffering shipping delays due to issues at the suppliers' warehouses.
Techniglue 1160 is a pre-thickened, two part fairing compound suitable for fairing in marine and industrial applications.
Designed with good hold-up on vertical surfaces, and it will bond well to a variety of substrates.
It has an easy 1:1 mix ratio with hardener.
NOTE - This product is the hardener only. The resin is sold separately.
| Part Number | Size |
|---|---|
| ATL-321194 | 1lt |
| ATL-321198 | 4lt |
WEST System
Techniglue 1160 is a pre-thickened, two part fairing compound suitable for fairing in marine and industrial applications. Designed with good hold-up on vertical surfaces, and it will bond well...
Norglass Paints
Norsells is a blended lightweight extender for Norglass epoxies. Use for filling and fairing surfaces. MORE INFORMATION Download Product Data Sheet Pa
WEST System
WEST System 417 is a low density microballoon-based filler used as a thickening agent with epoxy fairing systems to make fairing putties that are easy to sand or carve. 417 has a reasonably...
ATL Composites
RAPID CURE H90 Hardener Only Specifically formulated for use with R90 to provide thin film or glue joint gelation in approximately four minutes at 25C. Used in marine joinery and repair,...
ATL Composites
Techniglue R15 is a soft, thixotropic, solvent free, epoxy paste, formulated to cure at room temperature and produce a high strength structural adhesive for bonding of metals, particularly aluminium...
