Altex Yacht & Boat Paint Epoxy Barrier Undercoat is a high performance, sandable epoxy high build coating which is both very corrosion and water resistant.
Epoxy Barrier Undercoat is recommended for:
- Topside & Superstructure final sealing to provide an optimum surface for finish coating
- As a high build surfacer to remove defects and achieve a finish suitable for application of Altex Polyurethane Undercoat or one of the Elite Polyurethane finish coats
- As a high build barrier coat for below waterline application, used as part of an Altex Antifouling system
- Direct application to sanded GRP, epoxy laminated wood and epoxy sealed wood
- Direct application to epoxy faired surfaces
- Application over Altex Epoxy Primer or Altex High Build Surfacer
- Priming / undercoating over degreased & sanded aged polyurethanes, epoxies, fairing systems, gelcoats, epoxy laminates & fibreglass
Advantages:
- Excellent build properties up to 150µm DFT in a two pass application
- Excellent surfacing and sanding properties
- Very good corrosion protection
- Wide maximum self re-coat times for easy project management
- Very good water and chemical resistance
- Epoxy Barrier Undercoat may be top-coated with both acrylic or polyester urethane finishes and is especially formulated as an undercoat or sealer under the Altex Elite® range of polyurethane finish coats
- May be used as a high build surfacer / undercoat for topcoating with Altex Polyurethane Undercoat
- May be used in immersion service as part of an Altex Yacht & Boat recommended system
| Part Number | Kit Size |
|---|---|
| ATX-BARRIER125 | 1.25 Litres |
| ATX-BARRIER5 | 5 Litres |
