SHIPSHAPE PRIMER-UNDERCOAT by Norglass is the ultimate high-build performance epoxy coating to obliterate background irregularities and provide filling properties prior to coating with single or 2 pack finishes.

Use as a primer and undercoat for timber, fibreglass, aluminium and concrete, as well as an undercoat over Norglass NORSHIELD ANTI-CORROSIVE PRIMER on steel surfaces, and all areas where Northane colours are to be applied.

Grey Shipshape Primer/Undercoat is best for priming under strong colours. White Shipshape Primer/Undercoat for priming under lighter colours such as white & pastels.

Suitable for areas of continuous immersion and osmosis repairs.

Commonly used as a primer-undercoat for non-ferrous metals and as a topcoat in the bilge area of boats because of its satin gloss finish. SHIPSHAPE is the preferred primer for fibreglass.

IMPORTANT: This product is the Hardener Component of a TWO PACK product. This product is the hardener component only. You will need the Base Component too (sold only in a kit), and the two must be mixed together before use.

MIXING RATIO: 3 base:1 hardener by volume.
COVERAGE: Up to 10 sqm per litre
APPLY: Brush, roller or spray (thin with Northane Spraying Thinner)
CLEANUP: Norglass Epoxy Thinner

MORE INFORMATION

• Download the Norglass Catalogue & Product Guide
• Download Product Data Sheet
• Download Safety Data Sheet for Base
• Download Safety Data Sheet for Hardener