Fixtech's standard cure FIX190 is a single component adhesive sealant offering ultimate high strength in structural bonding and direct glazing bonding and sealing.

FIX190 cures into a very strong but flexible rubber, with excellent adhesion to many substrates such as, but not limited to; timber, fibreglass, carbon fibre, epoxy coated products, glass, ceramic, aluminium, all stainless steels, copper, rough and treated metals, along with most plastics. Refer to the TDS for more information.

• Skin Formation: Approx. 45 min (23°C & 75% relative humidity) 
• Cure Rate: 3-4mm/24Hrs (at 23°C & 75% relative humidity)
• MS Polymer, chemically neutral and fully elastic.
• Available in White and Black.
• Free of isocyanates and solvents.
• Suitable for above and below waterline.
• Potable water certified.
• Paintable and resistant to mould. (Compatibility tests recommended)
• UV stable producing non-yellowing whites and colour fast blacks.
• Primerless bonding to most common substrates.
• 3.6MPa - Equivalent to holding 36Kg per cm².
• Available in 600ml sausages only.

Application

• Structurally suitable in the Marine industry for deck to hull joins.
• Structurally suitable for the manufacture of composite trailers Eg: Rv's and motorhomes.
• Excellent adhesion to most porous and non-porous substrates. Primer may be required. Please refer to the TDS for more information.
• High performance mechanical properties.
• Flexible elastic rubber; movement accommodation +20%.
• No bubble formulation within the sealant.
• Easy to tool and finish. Fixtech does not recommend the use of chemicals or solvents during the process of tooling. Please refer to the TDS for more information.
• Can be wet on wet painted with all water based paints. (Compatibility tests recommended.)
• Can be applied under water.
• Minimal health and safety risks to the user.

More Information

Review the below documents for more information:

• Application Guide
• Technical Data Sheet
• Safety Data Sheet