Note that some Baintech, CTEK, GME & Vetus products are suffering shipping delays due to issues at the suppliers' warehouses.
Isolates both the positive and negative circuit which is a requirement for commercial and survey applications.
1,200 amp momentary and 240 amp continuous rating at 12 volt (120 amp continuous at 24 volt).
4 x 10mm brass bolts and nuts. Removable key. Rubber sealing cap.
Suits both 12 and 24 volt.
| Part Number | Ampage @ 12v | Suitable Voltage | Nut and Bolt Size |
|---|---|---|---|
| RWB-2079 | 240 continuous/1200 momentary | 12 or 24v | 10mm |
RWB Marine
Rated to 180 amp continuous duty at 12v. 800 amp Intermittant. Plastic body complete with rubber sealing cap. 10mm brass bolts & nuts. Suits both 12 and 24 volt. Part Number...
Remove the key to isolate and secure the electrical system. Designed for a master disconnect switch. Continuous switch, on/off/on/off. Removable key at the nominated off position. Weather...
Battery Switch 2 Pole - With Key With this 2 pole battery switch, simply turn and remove the key to isolate and secure the electrical system. 2 pole switch. Rated at 500 amps at 12V. Spare...
This key is designed to fit the 2 pole battery isolator switch. Note - switch not included. Part number SAW-23124A
Mastervolt’s BI battery isolator isbased on conventional diode technology. The diode voltage drop (ca. 0.6V) can be compensated for by adapting the output voltage of the connected charger...
