Note that some Baintech, CTEK, GME & Vetus products are suffering shipping delays due to issues at the suppliers' warehouses.
Garmin Fairing Block
Use Garmin's fairing block to position your GT30 series of thru-hull scanning transducers parallel to the water line for increased sonar accuracy. If the deadrise angle of your mounting location exceeds 5 degrees, you should use a fairing block to mount the device.
| Part Number |
|---|
| GMN-010-12224-00 |
Garmin
Designed for coastal fishing with an operating frequency range of 38-75 kHz (low frequency) and 80-130 kHz (medium frequency). This CHIRP transducer enables bottom detection down to 10,000’ and...
Garmin
Designed for coastal fishing with an operating frequency range of 150-250 kHz. This CHIRP transducer has a constant 25° beam width provides increased coverage under the boat. Designed for boats 25’...
Lowrance
Lowrance StructureScan 3D Thru-Hull Fairing Block This replacement fairing block suits standard StructureScan 3D thru-hull transducers. This fairing is not compatible with combined StructureScan 3D...
Lowrance
Lowrance StructureScan 3D & CHIRP Transducer Fairing Block This replacement fairing block suits combined StructureScan 3D and CHIRP thru-hull transducers. Note: This fairing is not compatible...
Lowrance
Lowrance TotalScan Thru Hull Single Fairing Block Replacement fairing block for TotalScan thru hull transducers. Fits both TotalScan M/H and TotalScan L/H thru hull transducers. Part...
