 - Black")
Black registration letters 150mm (6") in height.
- Self-adhesive
- Sold in single letters or numbers only - most boats require two of each number or letter (one for each side of the hull)
Boat registrations must be displayed clearly in all Australian states. They must be clearly visible and in a contrasting colour to the hull. Check your state's regulation with regards to the height of the lettering required for your particular vessel.
Installation Tips
- Arrange the letters and numbers on a clean, dry flat surface, with the colour facing up.
- Use a straight edge to align them.
- Double check that you have them in the correct order.
- Run two strips of electrical tape across the face of the letters to lock them in position.
- Flip the rego over and peel off the backing paper.
- Apply the rego stickers to the boat - they should retain the correct spacing and alignment.
- Press firmly to adhere the lettering to the boat fully.
- Gently remove the electrical tape.
| Part Number | Letter |
|---|---|
| TBW-MLD-54600AEA | A |
| TBW-MLD-54600BEA | B |
| TBW-MLD-54600CEA | C |
| TBW-MLD-54600DEA | D |
| TBW-MLD-54600EEA | E |
| TBW-MLD-54600FEA | F |
| TBW-MLD-54600GEA | G |
| TBW-MLD-54600HEA | H |
| TBW-MLD-54600IEA | I |
| TBW-MLD-54600JEA | J |
| TBW-MLD-54600KEA | K |
| TBW-MLD-54600LEA | L |
| TBW-MLD-54600MEA | M |
| TBW-MLD-54600NEA | N |
| TBW-MLD-54600OEA | O |
| TBW-MLD-54600PEA | P |
| TBW-MLD-54600QEA | Q |
| TBW-MLD-54600REA | R |
| TBW-MLD-54600SEA | S |
| TBW-MLD-54600TEA | T |
| TBW-MLD-54600UEA | U |
| TBW-MLD-54600VEA | V |
| TBW-MLD-54600WEA | W |
| TBW-MLD-54600XEA | X |
| TBW-MLD-54600YEA | Y |
| TBW-MLD-54600ZEA | Z |
 - Black")
 - White")
