Note that some Baintech, CTEK, GME & Vetus products are suffering shipping delays due to issues at the suppliers' warehouses.
Harken 13mm Line-Shedding Low-Beam Endstops - Set of 2
Endstops absorb shock loads. Use the built-in groove to deadend 2:1 control line. Sold in pairs. Fasteners not included.
| Part Number | HKN-2706 |
| Length (mm) | 27 mm |
| Length (in) | 1.0625 in |
| Maximum working load (kg) | 113 kg |
| Maximum working load (lb) | 250 lb |
| Breaking load (kg) | 339 kg |
| Breaking load (lb) | 750 lb |
| Use with track/rail | 2707 |
| Height above track (mm) | 3 mm |
| Height above track (in) | 1/8 in |
Harken
Harken 22mm Line-Shedding Endstops - Low Beam, Set of 2 When end controls are not used, add endstops to absorb shock loads Part Number Use with track/rail HKN-446 373
Harken
Harken 13mm Line-Shedding End stops - High-Beam, Set of 2 Endstops absorb shock loads. Use the built-in groove to deadend 2:1 control line. Sold in pairs. Fasteners not included Part...
Harken
Harken 27mm Line-Shedding End stops - Low Beam, Set of 2 The 27 mm endstops finish off traveler and genoa lead track ends cleanly and are sold in pairs. The molded endstops are light and smooth...
Harken
Harken 22mm Endstops - Low-Beam, Set of 2 When end controls are not used, add endstops to absorb shock loads. Part Number Fasteners Use with...
Harken
Harken 32mm Low-Beam Endstop - Set of 2 Endstops are designed to absorb shock loads and should be installed when end controls are not used.