Note that some Baintech, CTEK, GME & Vetus products are suffering shipping delays due to issues at the suppliers' warehouses.
NHK MEC Electronic Control System - NHK MEC Throttle Actuator
The electrical/mechanical change over box. Supplied with a 350mm wiring harness that connects the actuator to the throttle harness. Mechanical cables (purchased separately) are required to connect the actuator to the throttle linkages.processor box with plug-in connectors for control head(s), power supply and actuator(s).
Actuator shift KE-6-7+.
| Part Number |
|---|
| BLA-306380 |
NHK MEC
NHK MEC Electronic Control System - Actuator The throttle/shift actuator utilises cables such as the CCX633, CCX632, CC330 or CC230 to connect the actuator to the engine(s) throttle and gear...
NHK MEC
NHK MEC Electronic Control System - NHK MEC Harness KE-5+ Throttle Part Number Length Component Number NHK-306365 5m 9 (Single Station), 10 (Dual...
NHK MEC
NHK MEC Electronic Control System - NHK MEC Control Unit Electronic processor box with plug-in connectors for electric cables to connect control head(s), power supply and shift/ throttle harness...
NHK MEC
NHK MEC Electronic Control System - Switch - Idle The idle control switch is an optional extra which allows manual adjustment of the idle speed to be increased gradually to a maximum of 20% of full...
NHK MEC
NHK MEC Electronic Control System - NHK MEC Power Supply Harness Connects the control unit to the batteries. Harness length available in 2 sizes. Part Number Component...