-
Lenco Trim Tabs
Lenco Trim Tab Kit - Edge Mount with Standard Tactile Switch
Lenco Trim Tab Kit - Edge Mount with Standard Tactile Switch Kit Built-in auto retract. 12 volt. Waterproof key pad and solid state control box with waterproof plug and play Deutsch connectors. 36" power pigtail for control box. Edge Mount Trim...
-
Lenco Trim Tabs
Lenco Trim Tab - 7 Degree Mounting Wedge
7 Degree Mounting Wedge Suits lower mounting bracket and pre 2007 upper mounting bracket. Only compatible with 55514 and 55512. Suitable for curved transoms. Use in multiples of 2, as packing spacer. Part number LEN-55539
-
Lenco Trim Tabs
Lenco Standard Mount Trim Tab Kit - No Switch
The Standard Mount Trim Tab is perfect for boats with a standard or high transom requiring a maximum height of 14" (356mm) to mount the actuator. Standard Mount Trim Tab Kits featuring trim tabs with a matte finish. Kit...
-
Lenco Trim Tabs
Lenco Rocker Trim Tab Switch Kit
Rocker Trim Tab Switch Kit. Waterproof plug & play Deutsch connections. No auto retract feature. Does not require control box. Installation screws included. 3 Year Warranty. Part numberLengthHeight LEN-55533 69.85mm 69.85
-
Lenco Trim Tabs
Lenco Edge Mount Trim Tab Plates Only - No Switch
Lenco Edge Mount 12V Trim Tab plates. The Edge Mount Trim tab is perfect for boats with a low transom requiring a maximum height of only 11" (280mm) to mount the actuator. Note that the actuator mount to the trim tab plates is...
-
Lenco Trim Tabs
Lenco Power Pigtail - Single Actuator (91.4cm)
Lenco Power Pigtail 36" (91.4cm). Suits single actuator systems. Part numberLength LEN-55538 91.4cm (36")
-
Lenco Trim Tabs
Lenco Trim Tab Actuator - 101XD Series
Electric trim tab actuators manufactured by Lenco. The SRS 101XD Lenco actuators are available in 12-volt and 24-volt models. The 101XD actuator has a 2-1/4" (57mm) stroke and a choice of 5/16" and 3/8" mounting holes. All actuators include 1.8...
Trim Tabs
Trim tabs are small, adjustable plates that are mounted on the transom of a boat. They are used to control the pitch attitude of the boat while under way. The most efficient pitch attitude changes with speed, so trim tabs are adjusted based on speed and weight placement to maintain an efficient pitch attitude.
Trim tabs work by deflecting water. When the tabs are deployed, they create a force that pushes the boat down. This force is greatest when the tabs are angled at a sharp angle to the water. By adjusting the angle of the tabs, the operator can control the amount of force that is applied to the boat.
Trim tabs can be used to improve the performance of a boat in a number of ways. They can be used to:
- Reduce bow rise
- Get the boat on plane faster
- Correct listing
- Improve visibility
- Increase efficiency
- Reduce spray
Trim tabs are a valuable addition to any boat. They can help to improve the performance, comfort, and safety of your boating experience.
Here are some additional details about trim tabs:
- They are typically made of stainless steel or aluminum.
- They are usually mounted in pairs, one on each side of the transom.
- They are controlled by a hydraulic or electric actuator.
- The actuator is connected to a control panel on the boat's dashboard.
- The control panel allows the operator to adjust the angle of the tabs.
Trim tabs are a relatively inexpensive and easy-to-install modification that can make a big difference in the performance of your boat. If you are looking for ways to improve your boating experience, trim tabs are a great option.
Here are some tips for using trim tabs:
- Start with the tabs retracted and then adjust them as needed.
- Be careful not to over-trim the boat, as this can cause it to become unstable.
- Experiment with different settings to find what works best for your boat and your needs.
- Keep the tabs clean and free of debris to ensure proper operation.
With a little practice, you will be able to use trim tabs to improve the performance of your boat and make your boating experience more enjoyable.