Pumps - Bilge Pump Systems

The Rule Evacuator high volume utility pump is ideal for fast evacuation of water from a vessel. A favorite of tow boat operators, the Evacuator is comprised of two 4,000 gallon per hour (GPH) or 15,141 liters per hour (LPH) pumps in tandem, with a net...

Shurflo Water Filter Small Black Swivel Nut - 1/2 NPSF x 1/2 NPSM Essential requirement on all Shurflo pressure pumps. Fixed mount is fitted remotely from the pump. Swivel nut version is is fitted directly to pump. Compact design. Keeps debris out...

Dometic Water Pump Conversion Kit Upgrade your water pump system with the Dometic Water Pump Conversion Kit. This innovative kit features a new Dometic design motor and bellows, serving as a direct replacement compatible with all S-series and T-series...

Dometic Vacuum Breaker Kit Replaces vacuum breakers on Dometic VacuFlush, Traveler and other Sealand toilets. Functions as an anti-siphon check valve and prevents the back flow of contaminated water into the water system. Note: Not for use with hand...

Dometic Vacuum Switch Kit This vacuum switch is used with both the low-profile vacuum generator VG3 and the vacuum holding tank VHT.  It connects to the tank using a 1 1/2" sealing grommet, which is included. Part Number Legacy...

Dometic Vacuum Tank Replacement Switch Intended as a substitute for accumulator-style (threaded) tanks, the Dometic Vacuum Tank Switch is a purposeful replacement with factory preset settings. Intended for problems with the vacuum switch generator,...

Attwood Sahara Mk2 12V Automatic Bilge Pump Sahara Mk2 is the only automatic bilge pump that eliminates air-locks Patented X-Air™ Impeller ejects trapped air in the pump and pipework. Sahara Mk2 is the easiest automatic bilge pump to install...

TMC Caravan Pump, 12V Compact design enables an easy introduction to a tank. Low amperage draw. Designed for intermittent use and fully submersible only. Max. the continuous operation should not exceed 15 minutes. Wide variety of uses including...

TMC Float Switch - 12V/24V Combine with bilge pump for automatic operation. Float switch is made of high impact plastic, ultrasonically welded together for permanent waterproofing performance. Non-mercury mechanical switch. 8.5m tinned wire, fitted...

TMC Low Profile Non Automatic Bilge Pump, 12V Bilge pump designed for confined or tight spaces. Drains down as low as 10mm. Strainer can be rotated and cover can be removed for easy cleaning. Built-in reverse polarity protection. Built-in...

TMC Bilge Pump - 1500GPH, 24V Fully submersible bilge pump. Permanent magnet motor. Compact design. Corrosion resistant plastic housing. Tough nylon impeller construction. Snap-off base for easy mounting or cleaning. Transom mount with 0.9m...

TMC Gear Pump Bronze Part Number Motor Hose Diameter Amps Fuse Size L x W x H SAW-23256 12V 5/8" 15A 35A 161.6mm x 183.5mm x 171.5mm SAW-23257 24V 5/8" 8A 15A 161.6mm x...

Whale Manual Bilge Pump Gusher Titan Service Kit Spare Part for 131038 & 131039 Part Number WHL-131290

Rule-Mate fully automatic submersible bilge pumps with Rule's exclusive "Spongeability" feature. All-in-one bilge pump & switch so no float switch required. The innovative design incorporates the bilge pump and water sensor in a...

Diaphragm - Suits Plastimo Bilge Pump Spare Part for RWB-8262 Plastimo Bilge Pump Part Number RWB-SP720

A high quality membrane pump suitable for pumping/ transferring bilge water, seawater or diesel.  Suitable for boats up to 12m (ISO 15083) Synthetic housing, metallic parts of stainless steel (AISI 316) Easy to remove clamping ring for...

Submersible bilge pumps (IP67). Detachable strainer acts as screw-down base. Durable snap connection for easy cleaning. Double seals for long lifetime. Internal components are made from stainless steel (AISI 316). Comes with 1.2 metre cable. Part...

Submersible bilge pumps (IP67). Detachable strainer acts as screw-down base. Durable snap connection for easy cleaning. Double seals for long lifetime. Internal components are made from stainless steel (AISI 316). Comes with 1.2 metre cable. Part...

Submersible bilge pumps (IP67). Detachable strainer acts as screw-down base. Durable snap connection for easy cleaning. Double seals for long lifetime. Internal components are made from stainless steel (AISI 316). Comes with 1.2 metre cable...

This switch activates the pump when the bilge water level reaches 50 mm. it complements the VETUS range of electric bilge pumps and activates the pump when the bilge water level reaches 50 mm so that manual control of the pump is no longer...