Harken Snap Shackle, 8mm Snap shackles provide one-handed operation for temporary applications that require speed and easy release. Harken® snap shackles also fit a wide variety of blocks and make them removable Part...

Harken Snap Shackle, 8mm Designed for cockpit-mounted cruising installations and similar setups, the 1628 and 1629 cars with Carbo-Cams allow traveler control cleating at the car instead of the track ends. On-car cleating paired with single-sheave...

Harken Low-Load Furling Drum - 3mm Luff Wire Harken® Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. Part Number Weight Max. Line Dia. Use with Drum Dia...

Harken 27mm Stand-Up Toggle — 6 or 8 mm Pin, Control Tangs Maximum working load (kg) 1134 kg Maximum working load (lb) 2500 lb Part Number Height (mm) Max. Working Load Mainsheet block pin Ø (mm) Control block pin Ø...

Harken 27mm End Control - Double Sheave, Cam Cleat, Set of 2 Stand-up toggles hold blocks upright on travelers. Stand-up toggles with control tangs allow attachment of control blocks. Part Number Height Max. Working Load Mainsheet...

Harken 27mm End Control - Double Sheave, Cam Cleat, Set of 2 Stand-up toggles hold blocks upright on travelers. Stand-up toggles with control tangs allow attachment of control blocks Part Number Height Max. Working Load Mainsheet...

Harken 29mm Exit Bullet Block - Cam Cleat (Port, Starboard) Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all...

Harken Crossover Block, 56mm Crossover blocks provide a cleaner, more efficient deck. These easy-to-install blocks mount behind the stopper bank on each side of the cabin house and can route any line to the winch on the opposite side. Use the 1981 for...

Harken Crossover Block, 44mm Crossover blocks provide a cleaner, more efficient deck. These easy-to-install blocks mount behind the stopper bank on each side of the cabin house and can route any line to the winch on the opposite side. Use the 1984 for...

Harken Aluminum Mastbase Block, 44mm Low-profile mastbase halyard lead blocks are lightweight and can be grouped in a small area at the mastbase. Part Number Height Length Sheave Dia. Width Weight Max Line Dia. Max...

Harken Aluminium Mastbase Block, 57mm Low-profile mastbase halyard lead blocks are lightweight and can be grouped in a small area at the mastbase. Part Number Height Length Sheave Dia. Width Weight Max Line Dia. Max...

Harken Standard Low Profile Cam Base - Swivel Low-profile mastbase halyard lead blocks are lightweight and can be grouped in a small area at the mastbase. Part Number Height Weight Max Line Dia. Min. Line Dia. Fastener...

Harken High-Performance Furling Swivel  - 5mm Luff Wire Swivels are independent of the headstay, allowing you to tension the luff separately from the mast rake. Harken’s high-performance 207HP swivel has needle roller thrust bearings that...

Harken 57mm Ratchet Block - Swivel, Red Sheave Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Part Number Sheave Dia. Length Weight Max. Line Dia. Max...

Harken 57mm Ratchet Block - Swivel, Becket Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Part Number Sheave Dia. Length Weight Max. Line Dia. Max. Working...

Handle for Jabsco 45490-1000 'Y' Valve. Part NumberJabsco Part Number RWB-J11-131 45493-0000

Reelax Reef 450 / Reef 550 Stainless Steel Outrigger Base Wishbone Assembly (Each) Not suitable for Reef 550 Black Edition bases. Sold individually. Part Number Weight Dimensions REL-RX62901 0.5kg 35 x 25 x 10 cm

Reelax Reef 550 Stainless Steel Outrigger Main Tube Upgrade for Reef 450 (Pair) Upgrade your current Reef 450, with the larger Reef 550 stainless steel outrigger main tube to handle the larger 5.5m Grander Series 3K Carbon Poles. Comes with new...

Reelax Stow N Go Rod Keeper - Pack of 4 STOW N GO® features a large gap hook to easily fits over the arm or handle of most light and medium duty reels. STOW N GO® easily attaches by passing the hook through the looped end and pulling it tight...

Tiller Extension Universal Flexible Joint Nylon with Cover Plate Part Number SAW-35470