Owatrol's Deks Olje D.2 Gloss Finish is a flexible gloss finish and should be used over Deks Olje D.1 for best results.
Use D.2 for extra protection and easier maintenance especially on spars, oars, hulls, outboard transoms, cabin soles and cockpit trim.
If the grain is raised wet-sand the wood between applications of D.1 and D.2, following the wet sanding directions on the Deks Olje label.
For a satin finish mix D.1 and D.2 together in equal parts. Apply two coats after the surface is properly treated with D.1.
For a beautiful gloss finish, apply six coats of Deks Olje D.2. Sand between coats as required with 600 grit wet and dry sandpaper for maximum gloss, particularly prior to the final 2 coats.
Properties:
- Strong, flexible film that does not craze, peel or flake.
- Intense long-lasting gloss finish.
- Smooth transparent varnish. Enhance the wood grain.
- Provides long-term protection.
- No sanding between coats required.
- Easy maintenance - rinse surfaces periodically with fresh water.
- Fast and easy restoration without the need for stripping.
| Coverage rate per coat | 15m²/l - 161 sq/ft |
|---|---|
| Application tools | Brush - Roller |
| Application temperature | +8°C to +35°C |
| Drying time | 12-24 h. |
| Setting up time before use | 3 days. |
| Clean-up | Mineral-Spirits |
