Electrical, Battery and Solar

NMEA 2000 Network Toolbox  All NMEA 2000 fittings are standardised to fit all other NMEA 2000 certified products.  Simply add a T backbone connector to add more to the system.  Plug 'n Play.  CE Certified. Part...

These KUS Water Level Gauges to suit NMEA 2000 network come with a 316G stainless steel bezel and a full 1 year warranty.  Double layer reinforced anti-fogging lens.  316G stainless steel bezel with curved lens.  Plug 'n...

These KUS Fuel Level Gauges - to suit NMEA 2000 network come with 316G Stainless Steel bezels and a full 1 year warranty.  Double layer reinforced anti-fogging lens.  316G stainless steel bezel with curved lens.  Plug 'n...

These KUS Voltmeter Gauges - to suit NMEA 2000 network come with a 316G stainless steel bezel and a full 1 year warranty.  Double layer reinforced anti-fogging lens.  316G stainless steel bezel with curved lens.  Plug 'n...

KUS 5 Hole 304G Stainless Steel Senders - to suit NMEA 2000 network.  Utilising magnetic field to control the reed on-off switch, the product features a long service life and protection against vibration.  304G stainless steel.  SAE...

This KUS NKC 40 Signal Converter can be programmed to accept and convert anologue signal source recognised by the NMEA 2000 network.  Working temperature: -30°C - +80°C.  Visual temperature: -30°C - +80°C.  Storage...

This KUS Pressure Sensor Bar Switch combines the advantages of excellent anti-vibration performance and has a long service life with a waterproof rating of IP66. Part NumberVoltageOutputAlarmThread SAW-40023 6v - 24v 0 - 10 Bar 0.5±0.2...

This KUS Pressure Sensor combines the advantages of excellent anti-vibration performance and has a long service life with a waterproof rating of IP66. Part NumberBarVoltageOutputThread SAW-40020 0 - 5 6v - 24v 10-184 Ohm 1/8"...

Concealed Battery Switch - Box Only, to suit part number SAW-23124.  Simply turn and remove the key to isolate and secure the electrical system.  2 pole switch.  Rated at 500 amps at 12V.  SAW-28527: Dimensions - 98mm Ø x...

Concealed Battery Switch and Round Battery Box Kit, including nuts and bolts;  Simply turn and remove the key to isolate and secure the electrical system.  2 pole switch.  Rated at momentary 500A at 12V, and at 100A for operating...

Digital Mobile Charge40 is a breakthrough in battery to battery, on-the-water charging technology. Simply connect to the engine crank battery and your house electronic battery, allowing for up to 40 amps per hour to be transferred to your house battery...

2 pin flush mount power socket and plug with plastic sealing cap for socket. Chrome plated brass socket with rubber plug and brass contacts. Contact hole sizes are different - to eliminate reverse polarity connection. Suits 12 or 24 volt. 3...

Plugs Only. Chrome plated brass Part Number Type RWB-563 2 Pin Plug RWB-564 3 Pin Plug RWB-565 4 Pin Plug

"Ezy Lift Anchor Clip" is Australian made and invented and has many years of proven operation on thousands of boats throughout Australia & overseas. With the "Ezy Lift Anchor Clip" you use the power of the boat along with the buoyancy and drag...

Moulded rubber capped plug and socket with brass bullet type pin connectors for reliability and endurance. Suitable for 12 or 24 volt use. Max 12 volt @ 15 amp 24 volt @ 7.5 amp Part Number Size RWB-2866 30 x 40mm

Rubber boot only C/W brass insert suit 12mm shaft.

Auto type blade fuses. Packet of 4.  Part Number Amp Colour RWB-2085A 5 Orange RWB-2085B 10 Red RWB-2085C 15 Blue RWB-2085D 20 Yellow

Weather resistant in-line fuse holder rated up to 30 amp. Suits auto type blade fuses.

Yellow thermoplastic in-line fuse holder with wiring. Pushes together and seals for a waterproof connection. Fuse not included. 30 Amp rating.

Chrome plated brass screw apart electrical plug & sockets with base seal, retainer chain and socket cover. Contact hole sizes are different - to eliminate reverse polarity contact. 3 amp. 12 / 24v. Part Number Type Amp Volts ...