Networking and Adaptor Cables

With the GRA 10 Rudder Angle Analog Adapter aboard your vessel, you can give new life to your old gauges by making the transition from analog to digital. This simple-to-install adapter takes the data generated by traditional analog gauges and converts...

With the GET 10 Engine Tilt/Trim Analog Adapter aboard your vessel, you can give new life to your old gauges by making the transition from analog to digital. This simple-to-install adapter takes the data generated by traditional analog gauges and...

With the GST 10 Water Speed and Temperature Analog Adapter aboard your vessel, you can give new life to your old gauges by making the transition from analog to digital. This simple-to-install adapter takes the data generated by traditional analog gauges...

With the GFL 10 Fluid Level Analog Adapter aboard your vessel, you can give new life to your old gauges by making the transition from analog to digital. This simple-to-install adapter takes the data generated by traditional analog gauges and converts the...

Add fuel tracking capabilities to your Garmin chartplotter and optimize your boat's fuel economy. The GFS 10 tracks fuel flow use and sends the data to your chartplotter via the Garmin CANet or NMEA 2000. Unlike other fuel flow sensors, the...

Converts data between the Nexus network and NMEA 2000 Provides compatibility between Nexus and Garmin products Simple plug-and-play installation between Nexus, NMEA 2000 and USB No user setup or system configuration required Allows PC applications,...

Connect a thermal camera, underwater lighting or boat stabilizing system to a compatible GPSMAP series Garmin chartplotter with this PoE (Power over Ethernet) isolation coupler. The coupler provides connectivity to the Garmin Marine Network;...

Use these cable connectors when wiring your marine Ethernet connection. Sold in packs of two.

Route cables in your vessel without drilling holes with this split connector (threaded, RJ45 cable).

Weather cap protects the connector on your network cable from the harsh marine environment.

Connect your compatible echoMAP CHIRP or ECHOMAP Plus chartplotter/sounder combo to a NMEA 2000 network with this 6 foot (2 meters) adapter cable.

Extend your NMEA 2000 backbone with our backbone/drop cables (different sizes sold separately).

Supply power to your NMEA 2000 network with our 2 meter (6 ft) power cable.

Make NMEA 2000 installations easier with our multi-port T-connector. This solution creates a more robust NMEA 2000 backbone by reducing issues with breaking points as well as stress induced by long back bones. The rigid construction is less prone to...

This standard male or female NMEA 2000 light cable connector provides termination resistance for one end of the backbone of the network. Each male or female connector sold separately.

Add components to your NMEA 2000 network by installing our T-connector on your backbone cable. The revised version of this T-connector is offset by 45 degrees compared to the previous version.

This standard male or female NMEA 2000 light cable connector provides termination resistance for one end of the backbone of the network. Each male or female connector sold separately.

Use our male or female NMEA 2000 field-installable connectors to create custom-length drop cables and backbone extension cables. These connectors (sold separately) also can be used to shorten any NMEA 2000 drop/backbone cable.

Extend your NMEA 2000 backbone with our backbone/drop cables (different sizes sold separately).

Use our male or female NMEA 2000 field-installable connectors to create custom-length drop cables and backbone extension cables. These connectors (sold separately) also can be used to shorten any NMEA 2000 drop/backbone cable.