Steering & Engine Control Systems

Ultraflex S39 Swivel Clamp Block & Tube PART NO. 83560 Note: S39 Swivel clamp block in marine aluminium with marine aluminium tube. Part numberDescriptionN/AN/ASAW-83560Ultraflex S39 Swivel Clamp Block & Tube--

Ultraflex Nylon Bush To Connect Spent Tube To Fast Connect Helm PART NO. 84100 Part numberDescriptionN/AN/ASAW-84100Ultraflex Nylon Bush To Connect Spent Tube To Fast Connect Helm--

Adaptor Converts M66 -M47 The K66 Steering Cable Adaptor converts the M66 fast connect cable into a M47 nut to nut cable which accepts the old T71, T72, T73NR, T74NR and T81. The K46 converts the old M47 nut to nut cable into a M66 fast connect which...

This angled mounting bezel is used to mount the T71FC, T72FC, T73, T74, G86 & G88NR helms. A straight bezel mount is also available. Part numberColourAngle SAW-83540 Black 70° to bulkhead

Ultraflex Steering Cables - M66 Fast Connect Fast connect and simple installation. All stainless steel cable output ends as per ABYC P17 safety standards. Attaches directly to the tilt tube on all popular brands. Stroke length 228mm (9"). Minimum...

Fast connect and simple installation. All stainless steel cable output ends as per ABYC P17 safety standards, Attaches directly to the tilt tube on all popular brands. Stroke length 230mm (9"). Minimum steering cable bend radius 200mm (7.9"). ...

Ultraflex A73SS Stainless Steel Tiller Drag Link Arm suits Mercury Outboard Engines The A73SS and A74SS stainless steel drag link arm has an adjustable end to accommodate the centring of the motor. The A75 Swivel Assembly suits transom mounted and...

Round Rapid Fit Trim Ring Kit Manufactured in black P.V.C. material. It allows an easy replacement of a broken one, without detaching cables from the engines. You have to apply the clamps in the dedicated grooves, holding tightly the grommet on the rigid...

Black Rigging Flange. Designed to install rigging hoses through the hull. Internal thread to hold SAW-76266 Rigging Hose in position. Flange has 3 holes to suit 6 gauge mounting screws. UVS polyethylene conduit tubing for cables and wires. V2 rated...

This system gives good protection to the service cables of outboard motors against dirt, corrosion and UV damage. SAW-76250 and SAW-76251 have 3 holes in flange for 6 gauge mounting screws. This system makes the installation tidy and professional...

Black oval panel rubber grommet or trim ring. Part numberShapeCut Out ThicknessCut Out (L x H)Inside Dimensions (L x H)Outside Dimensions (L x H) SAW-295084 Oval 4.5mm 120mm x 60mm 100mm x 46mm 135mm x 85mm

For outboard engines up to 150 hp. 3.4 or 5 turns lock to lock, unbalanced - the number of turns lock to lock is not equal port to starboard and vice-versa. UC68-OBS side mount cylinder features a Patented turning nut for a fast and easy installation to...

For outboard engines up to 300 hp. 4.3 turns lock to lock, balanced. Hose not included*. Kits Contains: Outboard Front Mount cylinder (Refer to chart below). 83928 - UP28F front mount helm pump. 84115 - 1 litre hydraulic oil x 2. For Additional Station...

For outboard engines up to 150 hp. 4.7 turns lock to lock, balanced. For Honda BF115 and BF130 and Mercury Optimax 75, 90, 115 use 83920/3 - UC94-OBF/3. Hose not included*. Kits Contains: Front mount cylinder (Refer to chart below). 83920 -...

For inboard engines. 3.5 turns lock to lock, balanced. HYCO-I steering system is suitable for inboard boats up to 8m (26ft) length and 25mph maximum speed. Hose not included*. Kits Contains: 83959 - UC69-I Inboard cylinder. 83920 - UP20F front mount helm...

The UltraFlex® Gotech Steering Kits are designed for outboard engines rated up to 115HP. All Gotech Steering Kits come standard with a Front Mount Cylinder, Helm, hydraulic oil and premium Heavy-duty HiFlex QuickFit hose, the kit includes...

Hydraulic oil containing a balanced elastomer conditioning additive to prolong life of hoses and seals. Fortified with anti-wear zinc additives. Protection from corrosion, rust and oxidation. Anti foaming. Ideal for UltraFlex hydraulic steering...

Seal Kit suits UC132-OBS PART NO. 84126 Part numberDescriptionN/AN/ASAW-84126Seal Kit suits UC132-OBS--

Ultraflex LA1 - Link Arm for UC128-OBF/1 Cylinder Warning: LA1, LA2 and LA3 link arm kits are recommended for use on the first installation only and not as a retrofit. Installation has to be made by qualified technicians only. Refer to tightening load...

Suzuki engines built from 1998 to 2008 installing UC81-OBF/1, UC94?OBF/1, UC128-OBF/1, UC128/1-SVS cylinder require this optional kit. Part numberDescriptionN/AN/ASAW-83919Suzuki Kit 98-2008 Suits 83918/1--