Profurl Spinkit for Spinex
- 6 models available: SPINEX 0.9, SPINEX 1.5, SPINEX 2.5, SPINEX 4.0, SPINEX 6.5 and SPINEX 8.0
- For boats from 5 to 18m long, and asymmetrical spinnakers up to 400 m²
- All-in-one system: mechanisms, anti-torque cable, fittings, flexible PVC sleeves, 2-in-1 thimbles, and a swivel tack point
- The SPIN KIT is available separately for use on NEX reefing systems and other brands on the market (Facnor, etc.)
Using asymmetric spinnakers in some conditions can be dangerous. With the Spinex, you're going to rediscover the joys of this type of sailing because it allows you to:
- Easily handle this type of sail (even short-handed).
- Remain in the safety of the cockpit.
- Improve the performance of your sailing-boat by using downwind sails.
- Adaptable: One system for many uses.
| Part Number | PRF-SPIN0.9V2 |
PRF-SPIN1.5V2 |
PRF-SPIN2.5V2 |
PRF-SPIN4.0V2 |
PRF-SPIN6.5V2 |
PRF-SPIN8.0V2 |
| Model No. | 0.9 | 1.5 | 2.5 | 4.0 | 6.5 | 8.0 |
| For Boat Length | up to 8m | up to 10m | up to 12m | up to 15m | up to 18m | 20m + |
| For Sail Area | up to 60m2 | up to100m2 | up to 150m2 | up to 230m2 | up to 300m2 | up to 400m2 |
| Maximum Working Load | 900kg | 1500kg | 2500kg | 5000kg | 6500kg | 8000kg |
| Spool Diameter | 120mm | 150mm | 180mm | 220mm | 220mm | 250mm |
| Anti Twist Cable | 9mm | 11mm | 13mm | 15mm | 17mm | 19mm |
| Cable Length Delivered As Standard | 14m | 17m | 20m | 25m | 30m | 35m |
| Lower End Fitting | Clevis Pin Snap Shackle | Trigger Snap Shackle | ||||
| Upper End fitting | D shackle | |||||
