Scuppers, Drains, Plugs & Deck Fillers

Deck Filler Replacement BSP Caps 316G stainless steel. O-ring seal. Cap retainer chain Made in China Please Note: Key is not included.  Part numberSuits Filler SizeTo Suit FillersThreadSuits Key SAW-29645 1-1/2" (38mm) 29634,...

Rubber Bungs. Suitable for plugging bung holes. Sizes range from 10mm to 26mm. Part numberSizeMin - Max Diameter SAW-23104 Size 4 12.8mm - 15.5mm SAW-23106 Size 5 12.5mm - 15.8mm SAW-23108 Size 6 15.5mm - 1...

Ideal for draining the deck of a boat or air pressurizing your caravan, van body or as a vent to allow air flow in. Spring loaded door snaps shut. Water tight seal. Pilot holes for mounting. Australian made.  Spare parts: Rubber seal...

Part numberDescriptionTail Length SAW-29608 1-1/2" UNF - Hose Tail 50mm 75mm SAW-29609 1-3/4" BSP - Hose Tail 38mm 75mm

1-3/4" BSP Alloy Deck Filler Alloy Deck filler bungs are designed to be welded, they have no pre-drilled holes. Supplied complete with rubber 'O' seals in the plug. PART NO. 29606 Cut Out Size: Collar: Flange: Part numberDescriptionCut Out SizeCollar ...

This alloy deck filler has a 1-3/4 inch BSP thread and O-rings in the plug to give a good seal. It is designed to be welded in place. Spare plug. Part numberCutout neededCollarFastenings SAW-29604 60mm 13mm Weld in

Alloy Deck fillers bungs are designed to be welded, they have no pre-drilled holes. Supplied complete with rubber 'O' seals in the cap. Part numberDescriptionCut Out SizeCollarSAW-29612Deck Filler 1 3/4 BSP Alloy62mm21mm

Tank Filler With Breather Alloy Alloy Deck fillers bungs are designed to be welded, they have no pre-drilled holes. Supplied complete with rubber 'O' seals in the cap. PART NO. 29620 Cut Out Size: 50mm Collar: 14mm Flange: Part...

Drain Bung & Alloy Base Countersunk mounting hole drill guides can be easily drilled to preferred size. The fibreglass reinforced nylon plug is supplied with a rubber 'O' ring for maximum seal. Heavy layers of anti-seize grease in thread no...

Alloy Deck fillers bungs are designed to be welded, they have no pre-drilled holes. Supplied complete with rubber 'O' seals in the cap. Part numberDescriptionCut Out SizeCollarSAW-29610Deck Filler 1 1/2 UNF Alloy50mm15mm

BSP Thread Nylon Plug & Cast Aluminium Base - 29600 Note: Nylon Plug and Alloy Base. Alloy flange is designed to be welded. Fibreglass reinforced nylon plug is supplied with a rubber O-ring seal. Plug and base will not seize together. Pilot holes...