Transducers & Accessories

Connect a compatible bare wire transducer to a Garmin 12-pin sounder connector with this wire block adapter. Part Number GMN-010-11613-10

This best performing dual channel chirp (low/med) 1 kW thru-hull transducer, this bare wire mount performs well in deep water and has exceptional bottom and water column detail. This transducer has a depth of 3,000 ft; an operating frequency of 42 to 65...

Easily attach your compatible 4-, 8- or 12-pin transducer to the transom of your boat with this mount that provides excellent sonar returns at all speeds. Since the transducer is in the water at all times, the mount does not protect the transducer from...

The best performing dulchannel chirp (low/high) 1 kW in-hull, this narrow beam transducer provides crisp image detail with temp The transducer has a depth of 3,000'; an operating frequency of 42 to 65 kHz and 130 to 210 kHz; a beamwidth of 16 to 25...

Install your Garmin thru-hull scanning transducer easily with this mounting hardware. Includes an isolation plate, bushings, anti-rotation bolts, washers and nuts. Part Number GMN-010-12226-00

GT15M-TM transom mount transducer is perfect for fishermen who want clear bottom definition under the boat as well as crisp, clear and wide fish arches with excellent target separation to depth up to 1,900 feet. The 8-pin transducer features mid-band...

GT15M-IH In hull transducer is ideal for boats that want to install the transducer inside a fiberglass hull and not on the transom where cavitation could cause issues. It can be used with a hull deadrise angle between 0 and 25 degrees and is...

GT22HW-TM transducer is perfect for freshwater fishermen who want CHIRP traditional sonar and CHIRP ClearVü scanning sonar. This transom or trolling motor mounted transducer consistently displays clear and crisp fish arches with superior...

GT23M-TM transducer is perfect for coastal and offshore anglers who want CHIRP traditional sonar and CHIRP ClearVü scanning sonar. This transom mount transducer consistently displays clear and crisp fish arches with superior target separation...

Perfect for coastal and offshore fishermen who want CHIRP traditional sonar and CHIRP ClearVü scanning sonar with a stainless steel stem, this thru-hull mount transducer consistently displays clear and crisp fish arches with superior target...

This dual beam transducer replaces the one included with your echo series fishfinder. A 500 W 8-pin transducer, it has an operating frequency of 77/200 kHz; a beamwidth of 45/15 degrees; and mounts on a 0 to 70 degree transom. Transducer kit comes...

This plastic transom mount can be used to replace the dual frequency transducers included with many Garmin units. The 500 W 6-pin transducer has a maximum depth of 1,500 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 40 to 10 degrees; and...

GT52HW-TM transducer is perfect for fresh water and salt water fishermen who want CHIRP traditional sonar and CHIRP ClearVü and CHIRP SideVü scanning sonar. This transom mount transducer consistently displays clear and crisp fish arches with...

This bronze thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and wood hulls. This flush-mounted housing protrudes less than a quarter of an inch outside the hull and can sit on trailer rollers/bunks...

Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable. Part Number Length GMN-010-11617-50 10 ft GMN-010-11617-52 30 ft

The only thru-hull transducer that offers depth, speed and temperature in one package, this 8-pin 600 W triducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 24 degree deadrise...

This mid-range 1 kW 8-pin transducer with a narrow beam is good for deep water and bottom definition. It has a depth of 1,500 to 2,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 14x23 to 3x5 degrees; and a 0 to 26 degree deadrise...

This in-hull or pocket mounted transducer uses narrow beams at low/high frequencies to display depth and temperature data to your Garmin Marine Network via your sonar, such as the GSD 26. Designed to allow both traditional and Spread Spectrum scanning,...

This plastic thru-hull mount transducer with fairing block uses the low frequencies for deep water performance and high wide frequencies for shallow water performance. A 2 kW in a slightly smaller package, this bare wire transducer has a depth of 8,000...

This pocket/chest mounted transducer uses very narrow beams and low frequencies and wide beams for high frequencies to send depth and temperature to your Garmin Marine Network. A pocket version of the R599LH, this 1 to 3 kW bare wire plastic transducer...