Note that some Baintech, CTEK, GME & Vetus products are suffering shipping delays due to issues at the suppliers' warehouses.
This mid-range 1 kW 8-pin transducer with a narrow beam is good for deep water and bottom definition.
It has a depth of 1,500 to 2,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 14x23 to 3x5 degrees; and a 0 to 26 degree deadrise.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required.
| Part Number |
|---|
| GMN-010-10703-20 |
Garmin
This best performing dual channel chirp (low/high) 1 kW thru-hull transducer, this mount performs well in deep water and has exceptional bottom and water column detail. This transducer has a depth...
Garmin
Step up to 1 kW without a fairing block with this flush-mounted stainless-steel housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage. An...
Garmin
Designed for coastal fishing with an operating frequency range of 150-250 kHz. This CHIRP transducer has a constant 25° beam width provides increased coverage under the boat. Designed for boats 25’...
Garmin
This best performing dual channel chirp (low/med) 1 kW thru-hull transducer, this bare wire mount performs well in deep water and has exceptional bottom and water column detail. This transducer has...
