Plumbing Fittings

TruDesign Vented End Cap.    UV and chemical resistance.  Long tail and thick polyethylene walls.  Operating temperature - 0 °C to 120 °C. Part NumberDescriptionHose ThreadType SAW-453270 Reducing Bush 1 1/2"...

TruDesign Aquavalve End Cap/Plug. The plug is used to block one port when parts of the system are not yet installed, or maintenance is being completed and the system still needs to be used. Part NumberDescriptionHose...

Female 90 Degree Hose Tails with BSP female thread.  UV and chemical resistance.  Long tail and thick polyethylene walls.  Operating temperature - 0 °C to 120 °C. Part NumberFemale ThreadHose Tail...

Black nylon thru-hull connection skin fitting are moulded nylon glass reinforced polymer which dramatically increases strength, stiffness and light weight. Designed to be installed below water line. Paintable - Can be painted with all types of...

White polypropylene plastic skin fittings in a range of sizes. Barbed hose tail and theaded BSP male. The barbed tail can be cut off and the male threaded connection can then screw into a valve if desired. Size shown is hose I.D size. Part...

White plastic polypropylene threaded fittings with a 90 degree barbed hose connection for fitting through the hull or through bulkhead connections. Dual size - Suits both 25mm (1") and 28mm (1 1/8") hose

Accumulator tanks improve the performance and lengthen the pump life in most pressurised water systems. The accumulator tank holds a store of pressurised water to decrease pump cycling, pulsation and water hammer to give smoother, quieter water flow...

Accumulator tanks improve the performance and lengthen the pump life in most pressurised water systems. The accumulator tank holds a store of pressurised water to decrease pump cycling, pulsation and water hammer to give smoother, quieter water flow. Can...

Heavy duty, superior quality genuine gunmetal bronze 90 degree elbow hose tails. Male (external) BSP threaded to barbed hose tail end. Part NumberSize RWB-1493 3/4 inch BSP x 20mm Barb RWB-1495 1 inch BSP x 25mm Barb RWB-1496 1-1/4 inch...

2 way plastic shut-off "Y" valves with two independently operated outlets which allows for full flow or diversion to either line. 2 barbed sizes to suit hose. Part Number Size RWB-3115 13mm RWB-3116 20mm

A compact dual size non-return valve made from re-inforced nylon with neoprene valves and stainless steel fasteners. Dual barbed ports size suits 25mm (1") and 38mm (1 1/2") hose. Part Number Hose Size RWB-1424 25 and...

Black nylon non-return valves with rubber one-way flap and stainless steel screws. Each valve has 3 hose barb sizes which can be cut off to meet required hose size. Part NumberModelHose Sizes RWB-1423A A 13/20/25mm RWB-1423B B 25/32/38mm

A compact, non-corrosive, plastic in-line check valve to prevent back surge (up to 100 PSI) in water pressure pump installations. Also ideal where a valve is required with pumps that do not self prime. 1/2" (12mm) barbed hose tails. Part...

White polypropylene thruhull with scupper valve. Suits 38mm (1 1/2") hose. Max hull thickness : 75mm. Total length : 157mm Cut out hole : 45mm Supplied with S/S fastening screws. Part NumberLengthHose Size RWB-1430 157mm 38mm

White polypropylene material with rubber flap valve that opens to let water out then seals to prevent water entering. 70mm O.D diameter. Supplied with S/S fastening screws. Part NumberDiameter RWB-1431 70mm

These high quality nylon Shurflo hose fittings have a wing nut for easy hand tightening. All have 1/2" female thread to screw straight on to the inlet or outlet ports of Shurflo pumps. They are available with either 12mm (1/2") or 20mm (3/4") hose ends...

Female Reducing Coupling Female (internal) BSP threads with a different size each end. Part Number Size RWB-3160 3/4 x 1/2 Inch RWB-3162 1 x 3/4 Inch RWB-3163 1 1/4 x 1 Inch RWB-3164 1 1/2 x 1...

Male / Female Bushes Reduction bushes. Male outer thread with a smaller internal female thread. Part Number Size RWB-3140 3/4 x 1/2 Inch RWB-3141 1 x 1/2 Inch RWB-3142 1 x 3/4 Inch RWB-3143 1...

Male End Plugs Male (external) BSP threaded end sealing plug. Part NumberSize RWB-3175 1/2 Inch RWB-3176 3/4 Inch RWB-3177 1 Inch RWB-3178 1 1 /4 Inch RWB-3179 1 1/2 Inch RWB-3180 2 Inch

Female End Cap Female (internal) BSP threaded end sealing cap. Part Number Size RWB-3181 1/2 Inch RWB-3182 3/4 Inch RWB-3183 1 Inch RWB-3184 1 1 /4 Inch RWB-3185 1 1/2 Inch ...