Note that some Baintech, CTEK, GME & Vetus products are suffering shipping delays due to issues at the suppliers' warehouses.
Four prong reef anchor with 90° twist and lock feature that allows the anchor to be stowed flat. Intended for reef anchoring only, if snagged, prongs will straighten with retrieval load.
Vessels anchored with reef anchors should not be left unattended. Heavy hot dipped galvanised finish.
| Part Number | Approx. Boat Length | Prong Diameter | Overall Length (A) | Width (B) |
|---|---|---|---|---|
| BLA-146442 | 4m | 8mm | 460mm | 400mm |
| BLA-146444 | 5m | 10mm | 540mm | 400mm |
BLA
Most suitable for use with inflatable boats, canoes, kayaks or small dinghies where space is at a premium. Assembled in seconds. Hot dipped galvanised cast iron construction. Part...
BLA
Suited to temporary reef anchoring. Heavy duty hot dipped galvanised finish. If snagged in reef conditions the prongs will straighten with retrieval load. Vessels anchored with reef anchors should...
BLA
Complete anchoring kit comprising of a galvanised reef anchor, two metres of galvanised chain, two galvanised 'D' shackles and silver rope with a stainless steel thimble spliced in one end. Kit...
BLA
Complete anchoring kit comprising of a galvanised reef anchor, two metres of galvanised chain, two galvanised 'D' shackles and silver rope with a stainless steel thimble spliced in one end. Kit...
BLA
Complete anchoring kit comprising of a galvanised reef anchor, two metres of galvanised chain, two galvanised 'D' shackles and silver rope with a stainless steel thimble spliced in one end. Kit...
