STRIPSPEED - Propspeed Removal Solution
Avoid the grind - use Stripspeed™ from Oceanmax and remove Propspeed and foul-release coatings hassle free. Save time and money on Propspeed applications with Stripspeed! Suitable for use on all metal surfaces where Propspeed, or similar running gear coatings, have been applied.
Developed to help Propspeed applicators to prepare metal surfaces for reapplication, Stripspeed removes foul-release coatings in 30* minutes or less. The thick consistency easily hangs on vertical and overhead surfaces, making it easy to use and there is no mixing required. Just shake, pour and go.
Stripspeed is non-flammable, non-caustic, DCM and NMP free. Unlike grinding or using abrasives, Stripspeed doesn't cause mechanical wear through multiple refits, and doesn't create toxic dusts or debris, increasing the lifetime of the metal. Works on all hard-to-reach spots.
Do Not Use On:
- Transducers - Foulfree
- Underwater lights - Lightspeed
- Hull - Powdercoat
Easy to Use - Easy to apply, easy to remove. Scrape and then scrub with an abrasive pad.
Strips Swiftly - Stripspeed works within 30 minutes or less, speeding up the Propspeed removal process.
Apply at Any Angle - Stripspeed's unique formula can be applied at any angle with sliding off.
No Airbourne Particles - With no grinding required, there will be no airborne particles, making Propspeed removal harmless.
How Much to Use?
- Stripspeed 0.5 Litres: Strips Propspeed applied from One Propspeed Small Kit.
- Stripspeed 1.0 Litre: Strips Propspeed applied from One Propspeed Medium Kit.
- Stripspeed 2.0 Litres: Strips Propspeed applied from One Propspeed Large Kit.
- More Information
- Download Technical Data Sheet
| Part Number | Size |
|---|---|
| OMX-OM-SS501 | 1 Litre |
| OMX-OM-SS505 | 5 Litre |
*Timing is subject to atmospheric conditions. Ideal temperature is 15-27°C (60-80°F
