Fouling of running gear is a constant headache for boat owners worldwide. Propspeed, the industry leader in foul-release coatings, has been tackling the problem head on for more than 20 years. Now Prop speed is applying its propeller know-how to transducers to bring you Foulfree, a revolutionary foul-release coating that protects transducers from marine growth to ensure accurate signal transmission. With the Propspeed promise of proven performance, you can rely on Foulfree to keep your transducer free of marine growth for a year or more
For better adhesion of Foulfree Transducer Coating on plastic fairing (polyethylene, polypropylene, nylon, etc.), you may need to use a piece of 40 grit sandpaper - NOT Included.
Note: DO NOT sand the transducer housing or face as it will damage the transducer, voiding the manufacturer’s warranty.
Physical Properties & Performance:
- Dry Time: 20 minutes touch dry 8 hours hard dry at 20°C
- Recoat Time: Between 8 hours and 5 days at 20°C
- Zero toxic substances. Good fouling prevention properties
- Clear coating
- Long service life Easily recoated
- Foulfree is Airmar certified and has no adverse effects on transducers.
First Aid:
- If swallowed - Immediately call a doctor/physician. Rinse mouth with water. DO NOT induce vomiting.
- Skin contact - Wash with soap and water
- Eye contact - Flush with copious quantities of clean water. Seek medical attention.
- Inhalation - Remove to fresh air. Seek medical attention.
Health & Safety:
- If Swallowed - Immediately call a doctor/physician. Rinse mouth with water. DO NOT induce vomiting
- Skin Contact - Wash with soap & water
- Eye Contact - Flush with copious quantities of clean water. Seek medical attention
| Part Number | Binder Type | Solvent | Colour | Finish | Theoretical Coverage | Recommended Film Build | Shelf Life |
|---|---|---|---|---|---|---|---|
| OMX-FF15K | Silicone Polymer | Aromatic/Aliphatic Blend | Clear coating | Glossy | 12m2 / Lt | 75 microns per coat | 36 months |
Why do I need foulfree?
Fouling on the face of transducers can reduce their sensitivity. decreasing bottom-echo returns and fish targets and reducing the detail on sonar image you recieve. Foulfee forms a slick surface marine growth can't grab onto, keeping your transducer surface clean and clear.
Is Foulfree environmentally friendly?
Yes. Foulfree is specialized foul-release coating that does not poison marine growth or release any toxins into the marine environment.
Can Foulfree damage my transducer?
No. Foulfree has been tested and proven to have no adverse affects on transducers
How long will Foulfree last?
Foulfree lasts a minimum of 12 months. with an even longer service life in cooler climates
