Power Meters & Battery Monitors

Victron Smart Battery Protect - 12/24V, 220A Protects the battery against excessive discharge and can be used as a system on/off switch he Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which...

DC Analog Zero Center Ammeter with External Shunt Meters with backlighting for low light conditions Includes appropriate external DC shuntwhen required Backlit meter face (separate 12 or 24V DC backlight connections Function: Zero Center...

DC Analog Micro Ammeter with External Shunt - 0-50V DC Meters with backlighting for low light conditions Includes appropriate external DC shunt when required Backlit meter face (separate 12 or 24V DC backlight connections) Function: Micro Ammeter...

Victron IP21 Smart Battery Shunt - 500A The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can...

Victron Energy Meters ET340 - 3 Phase - Max 65A Energy Meters are typically used in an Energy Storage System, to measure the power and energy of the whole application at the distribution box. Also they can be used to measure the output...

Victron GX Tank The GX Tank 140 takes readings from up to four tank level sensors. It is an accessory for the Victron range of GX system monitoring products, such as the Cerbo GX Controller Tank levels can be read-out locally in the...

Standard Ammeter with External Shunt - DC Analog Meters with backlighting for low light conditions Includes appropriate external DC shuntwhen required Backlit meter face (separate 12 or 24V DC backlight connections Part...

DC Shunt 200A DC - Use with DC Ammeters For continuous operation, it is recommended that shunts not be run at more than two-thirds (66%) the rated current under normal conditions Shunt Type Resistive Full Scale 50 mV Amperage Max...

DC DIN Ammeter + External Shunt Standard European 72mm design White matte dial with black printed scale and knife-edge pointer Backlit meter face (separate 12 or 24V DC backlight connections) Terminal cover included to prevent accidental short...

The QuickLink 2-Channel Alarm Expander Kit adds two additional alarm relays to your ePRO Plus device. This kit can be used in case the application requires each alarm type to be assigned to a different relay contact. Part...

Victron Battery Protect - 12/24V, 220A The Battery Protect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine...

DC Analog Micro Ammeter with Coil - 0-50V AC Meters with backlighting for low light conditions Includes appropriate external transformer when required Backlit meter face (separate 12 or 24V DC backlight connections) Function: Micro Ammeter...

The USB MeterBus Adaptor converts the Morningstar MeterBus RJ-11 electrical interface to a standard USB 2.0 interface which allows communication between a PC and a Morningstar charge controller or inverter Part...

AC DIN Volt Meter Standard European 72mm design White matte dial with black printed scale and knife-edge pointer Backlit meter face (separate 12 or 24V DC backlight connections) Terminal cover included to prevent accidental short circuit Includes...

Blue Sea Mounting Panel Single Meter Panel mounts standard 2-3/4" Analog or Digital Meters Includes mounting screws and centre adjustment hole plug NOTE - This product has a lead time of approximately 8 weeks. It cannot be returned or refunded once...

Victron Interface MK3-USB (VE.Bus to USB) Victron Miscellaneous - Cables - Interface MK2-USB (VE.Bus to USB) Part Number VIC-ASS030130010

Blue Sea 360 Panel - M2 Monitor Blank 1 x 1 360 Panel System module mounts any M2 Monitor and matches existing 360 panels Part Number Height Width Weight BSS-1525 121mm 124mm 0.25kg

**check availability prior to ordering** DC Shunt 500A DC - Use with Digital Ammeters For continuous operation, it is recommended that shunts not be run at more than two-thirds (66%) the rated current under normal conditions Shunt...

DC Analog Standard Ammeter with Coil Meters with backlighting for low light conditions Includes appropriate external DC shuntwhen required Backlit meter face (separate 12 or 24V DC backlight connections Function: Standard...

ePRO PLUS - Display (CDU) Only Complete battery status information at a glance (%, V, A, Ah, W, h:m, °C) Supports up to three battery banks (12V, 24V and 48V) Very simple ‘Plug and Play’ installation Perfect integration with...