Davey Bronze Bar Cleat Fitting - Bolt Through
A gunmetal bronze bar cleat fitting available in two sizes. This bar cleat consists of three separate parts: two through-bolts to hold the oval timber bar, and a base plate. Use this bar cleat fitting to construct traditional timber & bronze cleats.
Each oval fitting is pre-drilled on the underside to accept one 8g screw. This holds the wooden bar in place.
Note that the oval timber bar is not supplied with this fitting.
| SKU | Height Above Base Plate | Base Dimensions | Hole Centres | Bolt Size Below Base Plate | Oval Bar Slot |
|---|---|---|---|---|---|
| DVY-1088/GM/162 | 2-1/2" (64mm) | 6-1/2" x 2-1/4" (165mm x 57mm) | 4" (103mm) | 4" x 7/16" (100mm x 11mm) | 1-1/2" x 1" (40mm x 25mm) |
| DVY-1088/GM/238 | 3-1/4" (82mm) | 9-1/2" x 2-1/2" (241mm x 64mm) | TBA | 6" x 5/8" (150mm x 16mm) | TBA |
