Lenco Pro Control Auto Replacement Actuator (12V)
Lenco Pro Control Actuators are a completely new engineered design.
- Quiet Operation.
- Class leading 750 lbs load.
- Supplied with 1.8 m lead.
| Part Number | Pin to Pin Distance | Pin Diameter |
|---|---|---|
| LEN-557050 | 254mm (10") | 3/8" (9.5mm) |
| LEN-557052 | 267mm (10-1/2") | 3/8" (9.5mm) |
| LEN-557054 | 292mm (11") | 3/8" (9.5mm) |
Frequently Asked Questions
Are Pro Control and 100 Series components compatible?
No, each range has specific components that are only compatible with individual Pro Control and 100 Series systems.
Do I need anodes on my trim tabs?
Anode use highly recommended, even if your boat is kept on a trailer, boat lift, or dry stack facility. Install the appropriate anode based on the type of water you are boating in. This will assist with protecting your tabs from electrolysis. Saltwater = ZINC or ALUMIMUM, Fresh = MAGNESIUM or ALUMINUM, Brackish = ALUMINUM. Keep them clean and replace as needed.
Should I bottom paint my trim tabs?
Your trim tabs can be bottom painted with a good metal bonding bottom paint. This will inhibit the growth of marine biologics on your trim tab blades. DO NOT PAINT BETWEEN THE ANODE AND THE BLADE. Bottom paint is not a substitute for anode protection.
How do identify what Pro Control/SD Pro actuators I have?
Pro Control/SD Pro actuators can be identified by a 9-digit code stamped at the back of the motor housing. Codes are as follows:
- 8M4009916 (10")
- 8M4012026 (10-1/2")
- 8M4012349 (11-1/2")
- 8M4009917 (12")
