Lenco Pro Control Auto System - Edge Mount Trim Tab Kit (12V)

Lenco's ProControl Auto edge mount kit is ideal for boats where mounting space is limited to the extreme edge of the transom. The stiffer blades allow the actuator to be positioned off blade centre if necessary.

Also this kit requires only 279mm in transom height, so can be mounted where swim platforms and other obstructions limit vertical space.

Pro Control Auto delivers industry-leading auto-levelling for unprecedented precision, control, and comfort on the water.

The original Trim Tab design, ideal for centre console fishing boats to cabin cruisers.

Out-performing the leading interceptor by 25%**, Pro Control is a game-changer for boat stability. It counteracts an array of dynamic conditions, including weight shifts, to keep you on an even keel.

Slam No More (24%* less impact). - Wave goodbye to the dreaded “thuds” and “slams” caused by impact, and move through water with unparalleled ease. Pro Control makes for a smoother, more comfortable and cushioned ride.


Tame Rough Seas - Have the confidence to cross the inlet and head out to deeper waters. Pro Control rivals far more expensive products when running offshore, delivering an impressive 15% pitch reduction* in dynamic seas. 

Control In An Instant - Fast response times provide enhanced control to the helm, making near-instant adjustments in response to dynamic sea conditions. In addition, improved hole-shot gets boaters on the plane faster, providing superior comfort and visibility sooner, with a rapid transition into auto-levelling.

Tame The Waves & Overtake With Confidence - Many vessels experience a temporary moment of instability when riding the back of a powerful boat wake, especially during an overtaking maneuver. With Pro Control’s authoritative and responsive roll control algorithm keeping the vessel on an even keel, overtaking is smoother than ever.

Pro Control Assist - Manual control is in your hands. Pro Control Assist offers a manual control option, featuring a smart, sleek dial controller, designed to provide a class-leading user interface. Get all the benefits of Pro Control including holeshot assist, with NMEA 2000® connectivity and the ability to store preferred positions for your trim tabs. 

5-Year Warranty - The robust design and simple maintenance mean Pro Control is built to last. Which is why it’s backed by a full, best-in-class 5-year warranty, giving boatbuilders and end users unrivalled peace of mind. 

Kit Includes:

• 1 x Pro Control Auto Keypad (557032).
• 1 x Pro Control Auto IMU (557038).
• 2 x Edge Mount electro-polished finish blades with 1 inch (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge) and 1/8 inch (3.2 mm) diameter hinge pin
• 2 x 2.25 inch Stroke SD Pro Actuators, 11-1/2 inch pin to pin (557054).
• 6 x Micro C Tee Connector (557088).
• Micro C Power Cable with fuse and ground (557072).
• 2 x 6ft Micro C Drop cables (557073), 1 x 15ft (557074) and 1 x 25ft (557076) Micro C Drop cables.
• 2 x 6 Pin Deutsch to Micro C Actuator Network Adapter Cable (557080).
• 2 x 3ft (.91 m) Pro Control Actuator Power Pigtail (557082).
• 1 x Wake Signal Adapter for Non-Mercury Systems (557084).
• 2 x Corrosion proof Upper Mounting Brackets with gland seal (557064).
• 2 x Corrosion proof Lower Mounting Brackets (557066).
• Lenco 2K Backbone Kit.

*vs baseline testing. 
** vs competitors (competitive boat automatic stabilization systems).

Frequently Asked Questions

Are Pro Control and 100 Series components compatible?
No, each range has specific components that are only compatible with individual Pro Control and 100 Series systems.

Do I need anodes on my trim tabs?
Anode use highly recommended, even if your boat is kept on a trailer, boat lift, or dry stack facility. Install the appropriate anode based on the type of water you are boating in. This will assist with protecting your tabs from electrolysis. Saltwater = ZINC or ALUMIMUM, Fresh = MAGNESIUM or ALUMINUM, Brackish = ALUMINUM. Keep them clean and replace as needed.

Should I bottom paint my trim tabs?
Your trim tabs can be bottom painted with a good metal bonding bottom paint. This will inhibit the growth of marine biologics on your trim tab blades. DO NOT PAINT BETWEEN THE ANODE AND THE BLADE. Bottom paint is not a substitute for anode protection.

How do identify what Pro Control/SD Pro actuators I have?
Pro Control/SD Pro actuators can be identified by a 9-digit code stamped at the back of the motor housing. Codes are as follows:

• 8M4009916 (10")
• 8M4012026 (10-1/2")
• 8M4012349 (11-1/2")
• 8M4009917 (12")