Simarine Tank Sender 1-1/4" BSP 240-33OHMS
| Part Number | Length |
|---|---|
| SIM-EN-TS100 | 100mm |
| SIM-EN-TS150 | 150mm |
| SIM-EN-TS175 | 175mm |
| SIM-EN-TS200 | 200mm |
| SIM-EN-TS225 | 225mm |
| SIM-EN-TS250 | 250mm |
| SIM-EN-TS275 | 275mm |
| SIM-EN-TS300 | 300mm |
| SIM-EN-TS325 | 325mm |
| SIM-EN-TS350 | 350mm |
| SIM-EN-TS375 | 375mm |
| SIM-EN-TS400 | 400mm |
| SIM-EN-TS425 | 425mm |
| SIM-EN-TS450 | 450mm |
| SIM-EN-TS475 | 475mm |
| SIM-EN-TS500 | 500mm |
Simarine
The Enerdrive fuel & liquid gauge sender is designed to work with gauges using the 240-33Ohm resistance system. The sender uses a magnetic reed switch, which guarantees a steady output signal...
Sam Allen
Waste tank sender unit with a 1-1/4" BSP thread, 250mm long. American Standard 240-33 ohms (240 ohms at empty, 33 ohms at full) 316G stainless steel Rubber gasket and stainless steel screws...
KUS Gauges
KUS senders fit a 1-1/4" BSP thread and change resistance between 240-33 Ohms. Multiple lengths are available and a rubber gasket is included. American Standard 240-33 ohms (240 ohms at empty,...
Sam Allen
Waste tank sender unit with a 1-1/4" BSP thread, 800mm long. 0-180 OHMS 316G stainless steel Rubber gasket and stainless steel screws included Part...
Sensotex Gauges
These Sensotex senders fit a 1-1/4" BSP thread and change resistance between 0-180 Ohms. Two lengths are available and a rubber gasket is included. Note that length is measured from the...