JL Audio JLid Communication and Network Bridge for MVI Amplifiers (MVi-HUB)
The MVi-HUB greatly simplifies the configuration of a multi-amp system by allowing all amplifiers of an amplifier network to appear in a single TüN® software session. Networking synchronizes the DSP presets of all amplifiers and distributes commands from a single, optional Digital Remote Controller (M-DRC-50 or DRC-205, sold separately) across the entire amplifier network. DRC commands can include Master Volume, Subwoofer Level, Fader, Zone Level and Preset Selection (functionality varies by model).
In the box:
- Network hub
- Two mounting screws
| Part Number | Physical dimensions (Height) | Physical dimensions (Width) | Physical dimensions (Depth) | Control Surface Dust/Water Rating (when properly installed) | Warranty | Power Input | Software updates | NMEA 2000® ports | USB 2.0 ports |
|---|---|---|---|---|---|---|---|---|---|
| JLA-010-03342-00 | 101 mm (3.98") | 285 mm (11.21") | 52 mm (2.05") | IPX2 | 3 years | 5 VDC | USB | 1 (Micro-C connector - Currently not used - intended for future development) | 1 (Software update only) |
