Raymarine RNS5 Gigabit Raynet Network Switch

The RNS-5 network switch is designed for expanding Raymarine integrated chartplotter systems using RayNet high-speed Ethernet cabling. Use the RNS-5 to integrate Axiom displays with radars, sonar modules, IP cameras, and Teledyne FLIR thermal cameras.

The RNS-5 also supports networking with Raymarine YachtSense digital control systems and the YachtSense Link marine mobile router. Two RNS-5 switches can be daisy-chained together for larger systems. The RNS-5 is simple to install and requires no complicated setup.

RNS-5 KEY FEATURES

• 5 RayNet Ethernet gigabit ports for fast and reliable connectivity 
• Rugged IPX 6 construction
• Reliable, waterproof RayNet connector Ethernet cable ports
• Designed for simple bulkhead mounting
• LED power and network port status indicators
• Unmanaged- simply plug and play with Raymarine devices.  
• No complicated setup or configuration

In the Box:

• RNS-5 Network switch.
• Documentation pack. 
• Fixing screws, (M4, 8.94 x 25 mm).   
• Power cable, 1.5 m (4.9 ft)

Please Note:

Network connection ports    

• 4 x RayNet connection ports (10/100/1000 Mbits/s)
• 4 x PoE RayNet connection ports (10/100/1000 Mbits/s). Each of the 4 ports supports PoE Classes 0 to 4, with 30 W maximum power available for each port.

Note: 

• You can mix a combination of PoE and non-PoE devices simultaneously, for a total of 8 devices (maximum PoE devices = 4; maximum non-PoE devices = 8).
• In order to sufficiently power PoE devices, the network switch’s power supply must exceed 10.8 V dc.