Enerdrive Voyager Digital Power System with Simarine Pico Touchscreen Battery Monitor, Individual Load Monitoring and Garmin Digital Switching
Since Enerdrive and Dometic broke into the 4WD canopy market in recent years, manufacturers and end users have consistently asked for a compact power solution to simplify the installation of modern setups. Enerdrive has produced several models to cover just about any requirement. Whether you just want a simple system for fridge and lights, or a complex setup with inverter and AC charging, Enerdrive has you covered.
All power systems are pre-wired by Enerdrive for easy installation: Bolt the box into your canopy or station wagon, connect the inputs, outputs and house battery, and hit the road!
All systems are built into a unique compact box arrangement and are designed to mount to the wall or ceiling of a vehicle's canopy. The systems are available in 2 or 3 orientations which dictate the location and orientation of the faceplate (Left, Right, or Ceiling Mount). Any brand of 12V battery is suitable, and compatible chemistries include Wet, Sealed, AGM, Gel and Lithium.
The Voyager Digital:
This new system from Enerdrive is top-of-the-range. If you want the best of the best, nothing beats the Voyager Digital. Key features include a DC-DC charger with alternator and solar input, a 3000W AC Inverter Charger, a Pico battery monitor, and a Garmin PowerSwitch. Charge from your vehicle's engine or solar panels, run almost any 240V AC accessory, and keep track of your battery level and loads with the Pico monitor. The Garmin PowerSwitch is a digital switching module that allows you to have complete control of your vehicle's systems.
The Voyager has been designed and built to give you access to every part of the build you may need without the hassle of finding tools to remove bulky covers or shifting everything within the canopy to access the side of your system. Main breakers are located at the bottom of the system and a subtle finger hole in the bottom grill gives you access to the Combi’s RCD reset switch. The 240v AC sockets are on the rear of the unit. The side of the unit intergrates a white/red led light bar.
The Voyager has been designed to make use of all available space in your canopy build. The octagonal shape allows you to push the Voyager closer to the door return on your canopy while still allowing access to the fuse panel when needed. The most prominent design feature of Voyager is the angled display panel. This panel allows you to read and access your instruments with greater ease no matter the orientation or mounting location.
- Suitable for use with Lead Acid, SLA, AGM, Gel and Lithium (LiFePo4) batteries (not included)
- ePOWER DC2DC40+ Vehicle/Solar Charger
- Enerdrive 3000W/100A 240V AC Inverter/Charger
- Simarine Pico Touchscreen Battery Monitor with Individual Load Monitoring
- Garmin PowerSwitch Digital Switching Unit with App Control
- 4x Circuit Breakers (Inverter/Charger, DC2DC Charger, Anderson Outlet, Fuse Panel)
- 12x Blade Fuses (6x spare + 1x spare with ILM)
- 2x Powerpoints (RCD protected)
- 50A Anderson Plug for Fridge etc.
- 12v Cigarette Lighter Socket
- 2x USB-A/USB-C Double Sockets
- Battery Reset Button
- Intergrated Light Bar
The Enerdrive True Sinewave Inverter-Charger can run multiple 240V AC appliances when you need power off-grid. The automatic multi-stage battery charger offers charging profiles for multiple types of batteries. The built-in transfer switch will automatically switch between 240V mains supply and battery power when necessary. The RCD Safety Switch detects any problems that may pose a shock risk and switches the output power off within 30ms. The unit has 3000W of power, and charges at a maximum rate of 100A (user adjustable).
The Enerdrive DC2DC40+ Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either the vehicle alternator or solar power. Featuring an MPPT solar controller for maximum efficency. Charge rate is user selectable from 5 to 50A. Vehicle input 12 or 24V. Solar input 45V and 800W max.
The Pico is an advanced WiFi enabled battery monitor from Simarine. Featuring a shunt and a high resolution 3.5" glass touchscreen with automatic backlight, it displays State of Charge (SOC), Time Remaining, Voltage, Wattage, Current, and Capacity of the House battery bank. It also measures temperature, pressure, second battery bank voltage, and tank level (1x volt type or 2x resistance type). Access data and settings with the mobile app: connect directly when near your vehicle, or connect through a WiFi router to monitor your system remotely. The Pico can measure 300A continuous. The additional SCQ50 module allows for the monitoring of 4 individual loads (Individual Load Monitoring) to get a a closer look at the operation of your system. The default setup measures the DC2DC input, Anderson output, and Fuse Panel, with one spare.
The Garmin PowerSwitch Box gives you control over up to six switch outputs directly from your mobile device, Apple CarPlay, or Android Auto, bringing your power management into the modern, connected age. Tailor on-screen switch panels with customisable labels, icons, channel groups and more. Each output is rated for 30A
Enerdrive offers some custom options for an additional cost. The blank switch covers can be labelled. Swap the USB socket or cigarette lighter socket to have two of the same. Please contact us with your requirements.
Please Note: As theses systems are built to order by Enerdrive, they may take up to 4 weeks to supply.
Battery Not Included.
Part Number | Orientation | Weight | Dimensions (mm) |
---|---|---|---|
ENE-K-V3L02 | Left | 28.5kg | 830W x 700H x 155D |
ENE-K-V3R02 | Right | 28.5kg | 830W x 700H x 155D |
Model | Voyager Digital with Pico + ILM and PowerSwitch |
---|---|
DC Charger | Yes - 12 and 24V, 50A max |
AC Charger | Yes - 100A |
Solar Charger | Yes - 45V and 800W max |
Inverter | Yes - 3000W |
Battery Voltage | 12V |
Battery Type | Lead Acid, SLA, AGM, Gel, LiFePo4 |
Battery Monitor | Simarine Pico |
Individual Load Monitor | 4x (DC2DC Charger, Anderson Outlet, Fuse Panel, Spare) |
Tank Level Monitor | Yes (1x volts, 2x resistance) |
Circuit Breakers | 4x (Inverter/Charger, DC2DC Charger, Anderson Outlet, Fuse Panel) |
Switches | 6x Digital Switches (Garmin) |
Battery Cable | Not Included (95mm recommended) |
Anderson Outlet | 1x 50A |
Cig Lighter Socket | 1x |
USB Socket | 2x Double USB-C/USB-A |
AC Outlet | Yes - 2x (with RCD) |
Battery Reset Button | Yes |
Low Battery Cutout | No |
Inverter Circuit Breaker | Yes (300A) |
Warranty | 5 Years |