White registration letters 200mm (8") in height.

• Self-adhesive
• Sold in single letters or numbers only - most boats require two of each number or letter (one for each side of the hull).
• NOTE - the actual font of letters/numbers supplied may differ slightly from the image here. If this is a concern please contact us.

Boat registrations must be displayed clearly in all Australian states. They must be clearly visible and in a contrasting colour to the hull. Check your state's regulation with regards to the height of the lettering required for your particular vessel.

Installation Tips

• Arrange the letters and numbers on a clean, dry flat surface, with the colour facing up.
• Use a straight edge to align them.
• Double check that you have them in the correct order.
• Run two strips of electrical tape across the face of the letters to lock them in position.
• Flip the rego over and peel off the backing paper.
• Apply the rego stickers to the boat - they should retain the correct spacing and alignment. 
• Press firmly to adhere the lettering to the boat fully.
• Gently remove the electrical tape.