Note that some Baintech, CTEK, GME & Vetus products are suffering shipping delays due to issues at the suppliers' warehouses.
Harken Powered Furling Manual Crank Handle
A cordless drill adapter and a short crank handle are included with each furler. Use the emergency handle or a cordless drill to turn the foil until the sail is reefed or furled.
| Part Number | HKN-7430 |
| Height (in) | 4 3/8 in |
| Length (in) | 4 9/16 in |
| Length (mm) | 116 mm |
| Weight (g) | 198 g |
| Weight (oz) | 7 oz |
| Height (mm) | 110.5 mm |
| Use with | Electric/hydraulic furling |
| Use with furling unit | Electric/hydraulic furling |
Harken
Harken Powered Furling Drill Adapter A cordless drill adapter and a short crank handle are included with each furler. Use the emergency handle or a cordless drill to turn the foil until the sail is...
Harken
Harken Hoistable Furling Swivel This optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing the headstay...
Harken
Harken Reflex Furling Lead Block Kit Harken recommends equipping asymmetric/code zero furling systems with lead blocks for safe furling from the cockpit. Lightweight, UV-stabilized Carbo blocks run...
Harken
Harken Furling Tack Adapter Tang - 5mm Stainless steel tack adapter tangs are used to adapt pin diameters on headstays to the standard clevis pin size that comes on the Harken Small Boat underdeck...
Harken
Harken Standard Furling Swivel - 3mm Luff Wire Swivels are independent of the headstay, allowing you to tension the luff separately from the mast rake. Part Number Weight Max...
