Spartan Marine Hardware

Spartan Bronze Deck Filler Cap - Waste This burnished bronze "Waste" deck filler cap is manufactured by Spartan Marine (USA). It features a low profile crown and rounded edges.  Designed to meet...

Spartan Bronze Deck Filler Cap - Diesel This burnished bronze deck filler cap from Spartan Marine (USA) is marked "Diesel".  It has a low profile crown and rounded edges. An O-ring provides...

Spartan Bronze Deck Cleats - 4 Hole Bronze deck cleats from US manufacturer Spartan.  These strong cleats feature four counter-sunk mounting holes to allow solid mounting through the deck...

Spartan Bronze Coaming Cleat - Diamond A solid bronze 6" horn cleat designed to mount to the side of a cockpit coaming, pilot house, etc. This cleat is tapped with three 1/4"-20 (UNC) threads and a...

Spartan Bronze Coaming Cleat A solid bronze 5" horn cleat designed to mount to the side of a cockpit coaming, pilot house, etc. This cleat is tapped with two 1/4"-20 (UNC) threads and a bronze...

Spartan Bronze Cleat Backing Plate Gunmetal bronze backing plate for Spartan's coaming cleat. Made by Spartan Marine in the US.  Measuring 60mm x 22mm (2-1/2" x 7/8"), this backing plate has two...

Spartan Bronze Chock - Straight A range of cast bronze straight chocks or fairleads made in the USA by Spartan. Chocks are used at the bow, stern and amidships to guide mooring lines, anchor lines...

Spartan Bronze Chain Deck Cover Cast bronze deck covers for ground tackle locker from Spartan Marine in the USA. The cover is tethered to the base with a brass chain and has a stainless steel...

Spartan Bronze Butt Hinges 4" - Spartan Bronze butt hinge from US manufacturer Spartan measuring 3-1/2" x 1-3/8" (88mm x 35mm) when open. These bronze hinges feature a stainless steel hinge pin and...

Bronze Bow Roller - Spartan This solid cast bronze bow roller combines rugged construction with superior appeal. Recessed into a 3-3/4" x 3-3/4" cut-out in the leading edge of the bowsprit...

Spartan Bronze Backing Plate - Diamond Gunmetal bronze backing plate for Spartan's diamond coaming cleat. Made by Spartan Marine in the US.  Measuring 40mm x 70mm (1-1/2" x 2-3/4"), this backing...

Bronze Anchor Shaft Brackets Solid bronze anchor shaft brackets developed to secure the anchor shaft when stored on deck.  Careful positioning will also help protect the deck from the anchor by...