Lewmar 260º Quadrant 254mm Radius
Fabricated in 6082 aluminium alloy, quadrants are pilot bored so machining of the bore can be done to match the rudder shaft by the installer. In all cases a rudder limit stop needs to be installed.
The design of quadrants provides a solution to installing a rudder stop. Eye bolt/cable tensioners are not supplied with quadrants and must be ordered separately.
| Part Number | Maximum Bore Diameter | Typical Boat Size |
|---|---|---|
| LEW-287354 | 80mm | 10-13m |
Lewmar
Lewmar 260º Quadrant 203mm Radius Fabricated in 6082 aluminium alloy, quadrants are pilot bored so machining of the bore can be done to match the rudder shaft by the installer. In all cases a...
Lewmar
Lewmar 80º Quadrant 305mm Radius Fabricated in 6082 aluminium alloy, quadrants are pilot bored so machining of the bore can be done to match the rudder shaft by the installer. In all cases a...
Lewmar
Lewmar Quadrant Eye Bolt/Tensioner 10mm Part Number LEW-SP28287096
Lewmar
Lewmar Constellation Wire in Conduit System - Chain Kit 5/8” to suit Quadrant < 305mm The wire in conduit system is used where a straight run to the quadrant is not possible. The...
Lewmar
Lewmar Constellation Wire in Conduit System - Chain Kit 5/8” to suit Quadrant < 457mm The wire in conduit system is used where a straight run to the quadrant is not possible. The...