Designed for coastal fishing with an operating frequency range of 150-250 kHz.
This CHIRP transducer has a constant 25° beam width provides increased coverage under the boat.
Designed for boats 25’ and above with fiberglass or wood hulls.
GENERAL
| FREQUENCY | Low Chirp(42-65kHz) & High Chirp(150-250kHz) |
|---|---|
| POWER | 1kW |
| BEAMWIDTH | 5°x10°-10°x19°/24°-26° |
| MAXIMUM DEPTH | 3000ft |
| DEPTH/SPEED/TEMPERATURE | Depth and Temperature |
| CABLE LENGTH | 12m |
| SUPPORTED DEADRISE/TRANSOM ANGLES | 0°-25° degrees |
Garmin
This best performing dual channel chirp (low/high) 1 kW thru-hull transducer, this mount performs well in deep water and has exceptional bottom and water column detail. This transducer has a depth...
Garmin
This mid-range 1 kW 8-pin transducer with a narrow beam is good for deep water and bottom definition. It has a depth of 1,500 to 2,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of...
Garmin
Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage. The tilted...
Garmin
Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage. The tilted...
Garmin
Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage. The tilted...