Enerdrive Adventurer Power System with Simarine Pico Touchscreen Battery Monitor and Individual Load Monitoring
Since Enerdrive and Dometic broke into the 4WD canopy market in recent years, manufacturers and end users have consistently asked for a compact power solution to simplify the installation of modern setups. Enerdrive has produced several models to cover just about any requirement. Whether you just want a simple system for fridge and lights, or a complex setup with inverter and AC charging, Enerdrive has you covered.
All power systems are pre-wired by Enerdrive for easy installation: Bolt the box into your canopy or station wagon, connect the inputs, outputs and house battery, and hit the road!
All systems are built into a unique compact box arrangement and are designed to mount to the wall or ceiling of a vehicle's canopy. The systems are available in 2 or 3 orientations which dictate the location and orientation of the faceplate (Left, Right, or Ceiling Mount). Any brand of 12V battery is suitable, and compatible chemistries include Wet, Sealed, AGM, Gel and Lithium.
The Adventurer:
This system is designed for high end setups. Key features include a DC-DC charger with alternator and solar input, an AC charger, a 2000W inverter and a Pico touchscreen battery monitor with Individual Load Monitoring. Charge from mains, your vehicle's engine or solar panels. Run induction cooktops, microwaves, coffee machines etc. Keep track of your battery level and loads with the Pico monitor.
- Suitable for use with Lead Acid, SLA, AGM, Gel and Lithium (LiFePo4) batteries (not included)
- ePOWER DC2DC40+ Vehicle/Solar Charger
- ePOWER 12V 40A AC Battery Charger
- 2000W 12V True Sine Wave Inverter with RCD
- Simarine Pico Touchscreen Battery Monitor
- 4x Individually Monitored Loads (DC2DC Charger, Left CBs, Right CBs, 1x Spare)
- 8x Front Circuit Breakers (Fridge, Simarine, Outlets, Water Pump, Air Pump, Lights, 3x Spare)
- 4x Main Circuit Breakers (Loads, AC Charger, DC Charger, Inverter)
- 4x Contura switches (unlabelled)
- 70mm2 House Battery Cable and Fuse
- 12v Cigarette Lighter Socket
- Dual 2.4A USB-A Socket
- Lithium House Battery Reset Button (for use with 12V vehicle systems only)
The Enerdrive DC2DC40+ Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either the vehicle alternator or solar power. Featuring an MPPT solar controller for maximum efficency. Charge rate is user selectable from 5 to 50A. Vehicle input 12 or 24V. Solar input 45V and 800W max.
The Enerdrive 12V 40A AC Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently. A 2nd and 3rd bank (e.g. Start) can be connected, with priority charging on the main (House) bank. Charge rate is user selectable. AC input: 100 to 240V.
The 2000W 12V Inverter with AC Transfer & Safety Switch is one in a family of affordable, high quality, professional level inverters by Enerdrive. By using the latest power conversion technology, our inverters deliver clean and energy efficient true sine wave AC power from your DC supply. Also included in the unit is a RCD Safety Switch. This switch monitors the flow of electricity through the inverter and detects any problems that may pose a risk to personal safety and switches the output power off within 0.03 of a second.
The Pico is an advanced WiFi enabled battery monitor from Simarine. Featuring a shunt and a high resolution 3.5" glass touchscreen with automatic backlight, it displays State of Charge (SOC), Time Remaining, Voltage, Wattage, Current, and Capacity of the House battery bank. It also measures temperature, pressure, second battery bank voltage, and tank level (1x volt type or 2x resistance type). Access data and settings with the mobile app: connect directly when near your vehicle, or connect through a WiFi router to monitor your system remotely. The Pico can measure 300A continuous. The additional SCQ50 module has 4x 50A shunts. 3 of these are used to measure the amperage of the DC charger, left circuit breakers, and right circuit breakers to allow for a more complete view of the system loads.
Enerdrive offers some custom options for an additional cost. The standard green faceplate can be swapped for a matte black version. The circuit breaker labels can be customised. The blank switch covers can be labelled. Swap the USB socket or cigarette lighter socket to have two of the same. The battery reset button can be modified for use with 24V vehicles. Please contact us with your requirements.
Please Note: As theses systems are built to order by Enerdrive, they may take up to 4 weeks to supply.
Battery Not Included.
| Part Number | Orientation | Weight | Dimensions (mm) |
|---|---|---|---|
| ENE-K-ADVENTURER-03-L | Left | 18kg | 630W x 665H x 155D |
| ENE-K-ADVENTURER-03-R | Right | 18kg | 630W x 665H x 155D |
| Model | Adventurer with Pico and ILM |
|---|---|
| DC Charger | Yes - 12 and 24V, 50A max |
| AC Charger | Yes - 100-240V, 40A max |
| Solar Charger | Yes - 45V and 800W max |
| Inverter | Yes - 240V, 2000W |
| Battery Voltage | 12V |
| Battery Type | Lead Acid, SLA, AGM, Gel, LiFePo4 |
| Battery Monitor | Simarine Pico + ILM |
| Individual Load Monitor | Yes (4x50A) |
| Tank Level Monitor | Yes (1x volts, 2x resistance) |
| Circuit Breakers | 8x Front, 4x Main |
| Switches | 4x Unlabelled |
| Battery Cable | Included - 70mm2 and Fuse |
| Anderson Outlet | No |
| Cig Lighter Socket | 1x |
| USB Socket | 1x Dual USB |
| AC Outlet | 1x (with RCD) |
| Battery Reset Button | Yes |
| Low Battery Cutout | No |
| Inverter Circuit Breaker | Yes (200A) |
| Warranty | 5 Years |
