WEST System 205 Fast Hardener

WEST SYSTEM 105 epoxy resin is formulated for use with the WEST SYSTEM hardeners. The resin and hardener is combined at a ratio of 5:1 or 3:1 depending on the hardener being used. WEST SYSTEM epoxy...

Epoxy measuring and mixing cups are marked with 2:1, 3:1, 4:1 & 5:1 lines to make it simple to accurately mix epoxy resin/hardener, two pack paints, etc. in the correct ratio. When used for...

Norsystem is a clear tough, marine epoxy with easy sanding properties when extended with Norglass fillers. Non shrinking. A two-pack product with a Base and 2 variations of Hardeners...

Used to get the correct fuel oil ratio mixture for all pre-mix 2-stroke outboards, with metric and ratio measurements. Part Number BLA-Q67886696

GFlex 560 Epoxy Kit by West System comprising of 125ml Resin & 125ml Hardener. G/flex 650 is a toughened epoxy adhesive that is simple to use, viscous enough not to drain out of a joint, and is...

Pigments are epoxy-based pastes used to tint the epoxy mixture and provide an even colour base, or to highlight surface flaws and imperfections, prior to the final finish system. WEST System 502...

G/flex 650 is a toughened epoxy adhesive that is simple to use, viscous enough not to drain out of a joint, and is resilient enough to absorb the stress of expansion, contraction, shock and vibration...

These small syringes are handy for injecting mixed epoxy and other glues into hard-to-reach cracks and holes. Sold in pairs.

Self adhesive ripstop sail repair tape. Part numberColourLengthWidth SAW-50010 Blue 7m 50mm SAW-50012 Green 7m 50mm SAW-50014 White 7m 50mm SAW-50016 Pink 7m 50mm SAW-50018 Red 7m 50mm ...

207 Special Clear Hardener has been specially developed for coating applications where a moisture resistant, natural wood finish is desired. 105/207 mixtures resist clouding in humid conditions and...

Use WEST System 206 Slow Hardener when extended working and cure time is needed.   WEST System 206 develops its physical properties more slowly at room temperature and is designed to be mixed...

G/flex 650 is a toughened epoxy adhesive that is simple to use, viscous enough not to drain out of a joint, and is resilient enough to absorb the stress of expansion, contraction, shock and vibration...