Mounting Systems

Ram Mounts Size C 1.5" Ball St Steel UBolt The u-bolt is adjustable to fit diameters of 0.75" to 1.0". The rubber ball is 1.5" in diameter. Part Number Size RAM-231U   C

Ram Mounts Size C Alum Strap Base 1.5 Inch Ball Aluminium strap base with 1.5 inch C-sized ball. The strap is the correct length to fit around most motorbikes, vehicles, ATVs etc.   Part...

Ram Mounts Size C Double or Triple Ball RAM Mount Aluminum 1.5 inch Double or Triple Ball on 2.5 inch Base with 0.62 inch Hole. Part Number Size RAM-217-1U  C

Ram Mounts Size C Tripod with 1.5" Ball Three legs attach to the RAM-202 evenly around the 2.5'' diameter plate.The legs are connected by screws that fit through the holes on the RAM-202. There are wing nuts on the end of the screw so they...

Ram Mounts Size C Umbrella Saddle Holder Umbrella saddle holder with 1.5" ball Part Number Size RAM-226U  C

Ram Mounts Size C 1.5" Double Ball 1/2" Pipe Third Double 1.5" standard ball with female 1/2" NPT thread. Part NumberSize RAM-RAM-217-3U  C

Ram Mounts Size C 1.5 Inch Ball 2.5 Inch Base Ram 1.5" ball with 2.5" base with standard AMPS hole pattern, and marine pattern. This part is slightly different than the usual ball mount - it has a female 5/16"-18 hole in the bottom. Part...

Ram Mount Size C Suction Cup 1.5" Ball 38mm 1.5" Ball attached to a twist action lock suction cup. This supercedes a triple suction cup arrangement. Part Number Size RAM-224U  C

Ram Mounts Size C Base 2" x 2" The RAM-202U-2525 is a C-size ball with a 2" x 2" square hole pattern. Part Number RAM-202U-2525

Ram Mounts Size C Ball 4-Hole Pattern Base The RAM-202U-23 contains a 1.5" diameter rubber ball connected to a rectangular plate with a 4-hole pattern of 1.5" x 2.5" center to center. Part...

Ram Mounts Size C Rectangle Base 2" x 4" Part Number Size RAM-202U-24  C

Ram Mounts Size C 2x2 Inch Square Base 1.5" Ball Aluminum 1.5'' Ball on a 2'' x 2'' plate. Part Number Size RAM-202U-22  C

Ram Mounts Size C 2" x 1.5" Base with 1.5" Ball 2" by 1.5" metal plate, with a 1 1/2" rubber ball. Part Number RAM-202U-225

Ram Mounts Size C 1.5" Ball on 1.5 x 3" Base RAM Mount Aluminum 1.5 inch Ball on 1.5 x 3 inch Plate. Part Number Size RAM-202U-153  C

Ram Mounts Size C Long Double Socket Arm Replacement long clamp arm (dist between centres 210mm) for 38mm (1.1/2 inch) series ball mounts. Part Number Size RAM-201U-D   C

Ram Mounts Double Socket Arm C Size Replacement clamp arm for the 38mm (1.1/2 inch) series of ball mount systems. Part Number Size RAM-201U  C

Ram Mounts Short Double Socket Arm C Size This RAM arm has a socket at each end for a 1.5" ball. Part Number Size RAM-201U-B  C

Ram Mount C Size Ratchet Adapter with 1.5" Socket Arm Ratchet Adapter with C-Size Single Socket Arm   Part Number Size RAM-162BAU  C

Ram Mounts Double Socket Arm Metal Knob Double socket arm with metal tightening knob, which has a socket at either end to fit a B-sized 1.5 inch ball. Part Number Size RAM-201MU  B

Real Mount Floor Mount Assembly Mentor Standard with 9" pole. Customer may substitute a longer pole (12" or 18") if necessary. Part Number RAM-166U