-
Bilge Pump Switch Panel with Alarm
Relaxn bilge switch panel with alarm and on-off-(on) rocker switch. Modern design bilge pump control panel with three position auto/off/man switch, visual and audible alarm. Manual position is momentary to avoid pump being left on inadvertently...
-
Relaxn
RELAXN Battery Switch - 4 Position
Relaxn Compact Battery Isolator Switch - 4 Position Robust weather resistant battery switch, features brass terminals and heavy-duty plastic construction making it ideal for marine and automotive applications. Supplies with mounting screws...
-
Relaxn
RELAXN Battery Switch - 2 Position
Relaxn Compact Battery Isolator Switch - 2 Position Compact battery isolator switch 2 position for single battery. Robust weather resistant battery switch, features brass terminals and heavy-duty plastic construction making it ideal for marine and...
-
KUS Gauges
KUS Water Temperature Sender
Manufactured by KUS, this range of water temperature sender units are compatible with most brands of temperature gauges. Available with a range of threads to suit different housings, these brass temperature sensors will operate up to a maximum of...
-
Relaxn
RELAXN Switch Panels - Water Resistant - 6 Switch with LED
Switch Panel 6P With LED indicators. Heavy-duty metal toggle switches. Water proof rubber boots over the toggle switches. 6 gang rubber booted with LED's Rubber gasket prevents water dripping behind the switch panel. LED panel indication...
-
Control Panels - Membrane Touch - 53064
20 Amp Relay Booster Kit Ultra compact panel size. Easy to install, almost no mounting depth required. Remotely installed control box. ON indicating LED and 10Amp PPTC protection. Heavy duty self adhesive (3M brand) for mounting. Warranty: 1 Year. 53066...
-
Solenoid - Heavy-Duty 3-Terminal
Heavy Duty Solenoid - most commonly used for anchor winches. Most commonly used for anchor winches. Suits series wound motors. Quick connect fittings. Heavy-duty M8 primary connection posts. Moulded mounting bracket. Replacement solenoid. Part...
-
Remote Control Unit - Handheld - 6 Channel
Six channel remote control unit designed for direct applications to command anchor winches, gangways etc. Waterproof rating of IP56 with a rubber soft grip. Casing made out of self extinguishing polyester resin. Part...
-
TMC Marine Equipment
Battery Selector Switch - Dual
TMC Battery Selector Switch has the following four positions which are etched into the bakelite housing. 1: Operation of No. 1 battery only 2: Operation of No. 2 battery only BOTH: Operation of both batteries or banks of batteries OFF:...
-
Spare Key For 2 Pole Battery Isolator Switch (23124)
Spare Key For 2 Pole Battery Isolator Switch (23124) This key is designed to fit the 2 pole battery isolator switch. Note - switch not included. Part Number Suits SAW-23124A SAW-23124
-
Sam Allen
Waste Tank Senders - 1-1/4" BSP, 240-30 Ohms
Waste tank sender unit with a 1-1/4" BSP thread, 250mm long. American Standard 240-33 ohms (240 ohms at empty, 33 ohms at full) 316G stainless steel Rubber gasket and stainless steel screws included Part...
-
Sensotex Gauges
Tank Senders - Stainless Steel, 1-1/4" BSP 0-180 Ohm
These Sensotex senders fit a 1-1/4" BSP thread and change resistance between 0-180 Ohms. Two lengths are available and a rubber gasket is included. Note that length is measured from the underside of the flange to the base of the shaft. Part...
-
KUS Gauges
KUS Stainless Steel Tank Sender - 1-1/4" BSP, 240-33 Ohm
KUS senders fit a 1-1/4" BSP thread and change resistance between 240-33 Ohms. Multiple lengths are available and a rubber gasket is included. American Standard 240-33 ohms (240 ohms at empty, 33 ohms at full) Suitable for fuel - petrol, ethanol...
-
Nylon 5 Hole To 1-1/4" BSP Adapter Kit
This nylon adapter fits in the holes used by a 5 hole sender and allows a 1-1/4" BSP screw-in sender to be used. It can also be added to a hole to allow a sender to be fitted.
-
Alloy Tank Sender Adapter
Alloy weld-on or screw-in adapter for tanks with 5 holes tapped with a metric thread. The holes do not go all the way through. This sender adapter converts tanks with 5-hole fittings for 1-1/4" BSP senders. Part Number Internal Hole Width Overall...
-
Stainless Steel Weld-In Adapter Bush 1-1/4" BSP
Sender unit adapter made from stainless steel. This weld-in bush suits 1-1/4" BSP thread senders. Outside Diameter: 56mm
-
KUS Gauges
Kus Tank Senders - Stainless Steel, 5 Hole 240-33 Ohms
Utilising a magnetic field to control the reed on-off switch, the sender features a long service life and protection against vibration. Compatible with Fuel Gauges with a 240-33 Ohms resistance. American Standard 240-33 ohms (240 ohms at empty, 33 ohms...
-
Waterproof Power Supplies - 709928
Waterproof Power Supply IP67 IN 170V-250V OUT MAX 60W Ideal for use in marine, caravan, motor homes and camper trailers, most commonly used with 12VDC lighting fixtures. IP67 waterproof rating. CE certified. Note: Designed to run LED Lights...
-
KUS Gauges
KUS Water Tank Gauge - Black (240-33 Ohm)
Sensotex 12/24V Black Water Gauge 240-33 OHMS Easy to read dials. Quick and easy installation. Cut Out Diameter: 52mm Volts: 12V/24V OHMS: 240-33 Part numberCut Out DiameterVoltsOhms SAW-40106 52mm 12V/24V 240-33
-
Inline Fuse Holder for Mini Blade Fuses
Mini Blade Fuse Holder. Part numberPack Size SAW-72087 1 SAW-72087-10 10